AM10E Series
10 watt dc-dc converters
Picture
Available
Soon
FULL SMD TECHNOLOGY
WIDE 2:1 INPUT RANGE
INPUT/OUTPUT ISOLATION: 1500VDC
•
•
•
•
•
•
•
•
OPERATING TEMPERATURE: -40°C ... +85°C
CONTINUOUS SHORT CIRCUIT PROTECTION
PIN-COMPATIBLE WITH MULTIPLE MANUFACTURERS
HIGH EFFICIENCY UP TO 90%
LOW PROFILE METAL PACKAGE
GENERAL DESCRIPTION
Our AM10E series is a family of cost effective 10W
single and dual output DC/DC converters. These conver-
ters combine nickel-coated copper package with high
performance features such as 1500VDC input/output iso-
lation voltage, continuous short circuit protection with
automatic restart and tight line / load regulation. Wide
range devices operate over 2:1 input voltage range pro-
viding stable output voltage. Input voltages of 12, 24 and
48VDC with output voltages of 3.3, 5, 7.2, 9, 12, 15, 18,
24, ±3.3, ±5, ±7.2, ±9, ±12, ±15, ±18 or ±24VDC. High
performance features include high efficiency operation
up to 90% and output voltage accuracy of ±1% maxi-
mum. All models are packaged in a low profile 50.8 x
25.4 x 10.16mm nickel-coated copper case. Operation is
specified over the full operating temperature range of -
40°C to +85°C with no derating required. Cooling is by
free-air convection.
ELECTRICAL SPECIFICATIONS
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Input Specifications:
General Specifications:
Efficiency
Voltage range
12VDC, 9~18VDC
24VDC, 18~36VDC
48VDC, 36~72VDC
Capacitor
83% to 90%
Switching frequency
200KHz, typ. 100% load
Output Specifications:
Filter
Voltage accuracy
±1%, max.
Voltage balance (Dual Output) ±1%
Isolation Specifications:
Rated voltage (60 sec)
Resistance
Ripple and noise (at 20MHz BW) ±100mVp-p, max.
1500VDC
> 1000MOhm
500pF, typ.
Short circuit protection
Short circuit restart
Continuous
Automatic
Capacitance
Line voltage regulation
Load voltage regulation
Temperature coefficient
Over load protection
±0.5%, max.
±0.5%, max.
Environmental Specifications:
Operating temperature (ambient) -40°C ... +85°C
Storage temperature
Case Temperature
Derating
Humidity (non-condensing)
Cooling
±0.02%/°C, typ.
130%, typ. 100% load
-40°C ... +125°C
+100°C, max.
None required
Up to 90%
Physical Specifications:
Dimensions
50.8x25.4x10.16mm
2.00x1.00x0.40inches
46g
Weight
Case material
Free-air Convection
Nickel-Coated Copper
MTBF: > 800,000 hrs @ 25°C (MIL-HDBK-217F)
Specifications are subject to change without notification.
Continued on next page
TO ORDER CALL 1-888-9-AIMTEC