AL6TVS10A thru AL6TVS180A
Surface Mount Transient Voltage Suppressors
Peak Pulse Power 600W Stand-off Voltage 10 to 180V
Features
• Glass passivated junction
• Moisture sensitivity: level 1, per J-STD-020
• Low profile package with built-in strain relief for surface
mounted applications
• Excellent clamping capability and Fast response time
• 600W peak pulse power capability with a 10/1000 µs waveform
• Polarity:Uni-directional
eSGB (SMAF)
Typical Applications
Use in sensitive electronics protection against voltage transients induced by inductive load switching
and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial,
automotive and telecommunication.
Maximum Ratings (TA = 25 °C unless otherwise noted)
Value
Unit
Parameter
Symbol
Peak Pulse Power Dissipation at TA=25ºC by 10/1000
μs Waveform (Fig.1)(Note1)(Note2)
PPPM
600
W
Peak pulse current with a 10/1000us
waveform(Note1)
IPPM
IFSM
See Next Table
80
A
A
Peak Forward Surge Current, 8.3ms Single Half Sine
Wave (Note3)
RΘJL
RΘJA
20
Typical Thermal Resistance Junction to Lead
Typical Thermal Resistance Junction to Ambient
℃/W
℃/W
100
TJ, TSTG
-55 to +150
Operating junction and storage temperature range
℃
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above TA = 25℃ per Fig. 2.
2. Mounted on copper pad area of 0.2x0.2” (5.0 x 5.0mm) to each terminal
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional device only,Fig.4
www.goodark.com
1/5
2018.06-Rev.A