AH286
Hall-Effect Smart Fan Motor Controller
Features
General Description
- On chip Hall sensor
AH286 is a monolithic fan motor controller with Hall
sensor’s capability. It contains two complementary
open-drain transistors for motor’s coil driving,
automatic lock current shutdown, and recovery
protections. In addition, rotor-state detection (RD)
output is for Rotor-state detection.
- Rotor-locked shutdown
- Automatically restart
- Rotor-state detection (RD) output
- Built-in Zener protection for output driver
- Operating voltage: 3.8V~20 V
- Output current: IO(AVE) = 500mA for SIP-5/SOT89-5
- Output current: IO(AVE) = 400mA for SOT23-5
- Package: SIP-5L, SOT23-5L, SOT89-5L
To avoid coil burning, rotor-lock shutdown detection
circuit shut down the output driver if the rotor is
blocked and then the automatic recovery circuit will
try to restart the motor. This function repeats while
the rotor is blocked. Until the blocking is removed,
the motor recovers running normally.
Pin Configuration
Pin Descriptions
Symbol
Description
( Front View )
286
RD
Vdd
DO
Rotor-state detection
Input power
Output pin
1 : RD
2 : Vdd
3 : DO
4 : DOB
5 : GND
DOB
GND
Output pin
Ground
1 2 3 4 5
SIP-5L
DOB
4
Vdd
5
Vdd 1
RD
5
286
286
2
3
GND
DO
7
4 DOB
1
2
3
RD GND DO
SOT89-5L
SOT23-5
Ordering Information
AH286 X - X X X
Packing
Wafer Body
Package
Lead
Blank or
P: SIP-5L
W: SOT23-5L
Y: SOT89-5L
L : Lead Free
Blank : Bulk
: Tape & Reel
(for SOT Packages Only)
A~Z : if necessary
to specify
A
This datasheet contains new product information. Anachip Corp. reserves the rights to modify the product specification without notice. No liability is assumed as a result of the use of
this product. No rights under any patent accompany the sale of the product.
Rev. 1.0 Sep 29, 2005
1/9