Precision Analog Microcontroller with
RF Transceiver, ARM Cortex-M3
ADuCRF101
Data Sheet
External watch crystal for wake-up timer
16 MHz internal oscillator with 8-way, programmable
divider
FEATURES
Analog input/output (I/O)
6-channel, 12-bit SAR ADC
Memory
Single-ended and differential inputs
Programmable data rate of up to 167 kSPS
On-chip voltage reference
Supply range: 2.2 V to 3.6 V
Power consumption
128 kB Flash/EE memory, 16 kB SRAM
10,000-cycle Flash/EE endurance
10-year Flash/EE retention
In-circuit download via serial wire and UART
On-chip peripherals
UART, I2C, and SPI serial I/O
28-pin GPIO port
280 nA in shutdown mode, nonretained state
1.9 µA in hibernate mode, processor memory and
transceiver memory retained, RF transceiver in sleep
mode
2 general-purpose, 16-bit timers
32-bit wake-up timer
210 µA/MHz Cortex-M3 dynamic current
12.8 mA transceiver in receive mode, Cortex-M3 in
hibernate mode
16-bit watchdog timer
8-channel pulse-width modulation (PWM)
Package
64-lead, 9 mm × 9 mm LFCSP
9 mA to 32 mA transceiver in transmit mode, Cortex-M3
in hibernate mode
Temperature range: −40°C to +85°C
RF transceiver
Frequency bands
Tools
Low cost development system
Third-party compiler and emulator tool support
862 MHz to 928 MHz
431 MHz to 464 MHz
Multiple configurations supported
Receiver sensitivity, bit error rate (BER)
−107.5 dBm at 38.4 kbps, 2FSK
Single-ended and differential power amplifier (PA)
Low external bill of materials (BOM)
Microcontroller
APPLICATIONS
Battery-powered wireless sensors
Medical telemetry systems
Industrial and home automation
Asset tracking
Security systems (access systems)
Health and fitness applications
32-bit ARM Cortex-M3 processor
Serial wire download and debug
FUNCTIONAL BLOCK DIAGRAM
COMMUNICATIONS
6-INPUT
MUX
12-BIT
SAR ADC
LOW POWER
RF TRANSCEIVER
WIRELESS
WIRED
TEMPERATURE
SENSOR
SERIAL
WIRE
2
SPI
UART
PWM GPIOs
I C
BAND GAP
REFERENCE
PRECISION DATA
ACQUISITION
LOW POWER PROCESSING
CORTEX-M3
PROCESSOR
OSC
POR
128kB
FLASH/EE
WATCHDOG
TIMER
2× GENERAL-
PURPOSE TIMERS
16kB
SRAM
INTERRUPT
CONTROLLER
WAKE-UP
TIMER
ADuCRF101
ON-CHIP PERIPHERALS
Figure 1.
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2013–2014 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com