3-Channel, Sigma-Delta ADC with SPI
Data Sheet
ADE7903
FEATURES
TYPICAL APPLICATION CIRCUIT
PHASE PHASE PHASE
ISOLATION
BARRIER
One (ADE7903) 24-bit, Σ-Δ ADC (simultaneously sampling
with three ADE7912/ADE7913 ADCs)
On-chip temperature sensor
4-wire SPI serial interface
Standalone 24-bit, Σ-Δ ADC
NEUTRAL
A
B
C
V1P
3.3V
VM
IM
PHASE A
ADE7912/
ADE7913
IP
Up to four ADE7903 and ADE7912/ADE7913 devices clocked
from a single crystal or an external clock
Synchronization of multiple ADE7903 and ADE7912/ADE7913
devices
31.25 mV peak input range for current channel
500 mV peak input range for voltage channels
Single 3.3 V supply
V2P
GND
GND
GND
GND
ISO_A
MCU
3.3V
V1P
VM
IM
3.3V
PHASE B
ADE7912/
ADE7913
IP
V2P
20-lead, wide body SOIC package
Operating temperature: −40°C to +85°C
GND
ISO_B
MCU
3.3V
V1P
VM
IM
APPLICATIONS
PHASE C
ADE7912/
ADE7913
3-phase shunt-based polyphase meters with neutral channel
measurement
Single-phase meters
Power quality monitoring
Solar inverters
Process monitoring
IP
GND
MCU
V2P
GND
ISO_C
MCU
3.3V
V1P
VM
IM
NEUTRAL
LINE
ADE7903
Standalone ADCs
IP
V2P
Protective devices
LOAD
Isolated sensor interfaces
Industrial programmable logic controllers (PLCs)
GND
MCU
Figure 1.
GENERAL DESCRIPTION
The ADE7903 is a nonisolated, 3-channel, Σ-Δ analog-to-digital
converter (ADC) for the neutral line of polyphase energy
metering applications using shunt current sensors. The
ADE7903 can also be used for single-phase energy metering
and other standalone ADC applications. The ADE7903 features
three 24-bit ADCs. The current ADC provides a 67 dBFS
signal-to-noise ratio (SNR) over a 3.3 kHz signal bandwidth,
whereas the voltage ADCs provide an SNR of 72 dBFS over the
same bandwidth. One channel is dedicated to measuring the
voltage across a shunt when the shunt is used for current sensing.
Up to two additional channels are dedicated to measuring
voltages, which are usually sensed using resistor dividers.
One voltage channel can be used to measure the temperature
of the die via an internal sensor. The ADE7903 includes three
channels: one current channel and two voltage channels.
measurement. The three phases are isolated with ADE7912/
ADE7913 devices, while the neutral line is not isolated with the
ADE7903.
The ADE7903 configuration and status registers are accessed
via a bidirectional SPI serial port for easy interfacing with
microcontrollers.
The ADE7903 can be clocked from a crystal or an external
clock signal. To minimize the system bill of materials, the
master ADE7912/ADE7913 can drive the clocks of up to three
additional ADE7912/ADE7913 or ADE7903 devices.
Multiple ADE7912/ADE7913 and ADE7903 devices can be
synchronized to sample at the same moment and provide
coherent outputs. The ADE7903 can also be used individually
as a standalone ADC.
The ADE7903 is available in a 20-lead, Pb-free, wide body SOIC
package.
Together with the ADE7912/ADE7913, the ADE7903 provides
a small form factor, 3-phase isolated solution with a neutral
Rev. 0
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Technical Support
©2014 Analog Devices, Inc. All rights reserved.
www.analog.com
5秒后页面跳转
NTC热敏电阻与PTC热敏电阻的应用原理及应用范围
GTO与普通晶闸管相比为什么可以自关断？为什么普通晶闸管不能呢？从GTO原理、应用范围带你了解原因及推荐型号
LF353数据手册解读：特性、应用、封装、引脚说明、电气参数及替换型号推荐
A4950资料手册解读：特性、应用、封装、引脚功能、电气参数及代换型号
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
