AD677JNZ

更新时间： 2024-01-24 21:59:39

品牌	Logo	应用领域
亚德诺 - ADI		转换器光电二极管信息通信管理
页数	文件大小	规格书
12页	72K
描述
MICROCIRCUIT, DIGITAL-LINEAR, FAST, SERIAL, 16-BIT, A/D CONVERTER, MULTICHIP SILICON

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

AD677JNZ 技术参数

是否无铅：	含铅	是否Rohs认证：	符合
生命周期：	Active	零件包装代码：	SOIC
包装说明：	SOP, SOP28,.4	针数：	28
Reach Compliance Code：	compliant	ECCN代码：	EAR99
HTS代码：	8542.39.00.01	风险等级：	5.08
最大模拟输入电压：	10 V	最小模拟输入电压：	-10 V
转换器类型：	ADC, SUCCESSIVE APPROXIMATION	JESD-30 代码：	R-PDSO-G28
JESD-609代码：	e3	长度：	17.9 mm
最大线性误差 (EL)：	0.0023%	湿度敏感等级：	5
标称负供电电压：	-12 V	模拟输入通道数量：	1
位数：	16	功能数量：	1
端子数量：	28	最高工作温度：	70 °C
最低工作温度：		输出位码：	BINARY
输出格式：	SERIAL	封装主体材料：	PLASTIC/EPOXY
封装代码：	SOP	封装等效代码：	SOP28,.4
封装形状：	RECTANGULAR	封装形式：	SMALL OUTLINE
峰值回流温度（摄氏度）：	260	电源：	5,+-12 V
认证状态：	Not Qualified	采样速率：	0.1 MHz
采样并保持/跟踪并保持：	SAMPLE	座面最大高度：	2.65 mm
子类别：	Analog to Digital Converters	标称供电电压：	12 V
表面贴装：	YES	技术：	BICMOS
温度等级：	COMMERCIAL	端子面层：	Matte Tin (Sn)
端子形式：	GULL WING	端子节距：	1.27 mm
端子位置：	DUAL	处于峰值回流温度下的最长时间：	30
宽度：	7.5 mm	Base Number Matches：	1

AD677JNZ 数据手册

2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text

of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a

specific exemption has been obtained.

3. REQUIREMENTS

3.1 Item requirements. The individual item requirements for device classes Q and V shall be in accordance with

MIL-PRF-38535 and as specified herein or as modified in the device manufacturer's Quality Management (QM) plan. The

modification in the QM plan shall not affect the form, fit, or function as described herein. The individual item requirements for

device class M shall be in accordance with MIL-PRF-38535, appendix A for non-JAN class level B devices and as specified

herein.

3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified

in MIL-PRF-38535 and herein for device classes Q and V or MIL-PRF-38535, appendix A and herein for device class M.

3.2.1 Case outline(s). The case outline(s) shall be in accordance with 1.2.4 herein.

3.2.2 Terminal connections. The terminal connections shall be as specified on figure 1.

3.3 Electrical performance characteristics and postirradiation parameter limits. Unless otherwise specified herein, the

electrical performance characteristics and postirradiation parameter limits are as specified in table I and shall apply over the full

ambient operating temperature range.

3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical

tests for each subgroup are defined in table I.

3.5 Marking. The part shall be marked with the PIN listed in 1.2 herein. In addition, the manufacturer's PIN may also be

marked as listed in MIL-HDBK-103. For packages where marking of the entire SMD PIN number is not feasible due to space

limitations, the manufacturer has the option of not marking the "5962-" on the device. For RHA product using this option, the

RHA designator shall still be marked. Marking for device classes Q and V shall be in accordance with MIL-PRF-38535.

Marking for device class M shall be in accordance with MIL-PRF-38535, appendix A.

3.5.1 Certification/compliance mark. The certification mark for device classes Q and V shall be a "QML" or "Q" as required in

MIL-PRF-38535. The compliance mark for device class M shall be a "C" as required in MIL-PRF-38535, appendix A.

3.6 Certificate of compliance. For device classes Q and V, a certificate of compliance shall be required from a QML-38535

listed manufacturer in order to supply to the requirements of this drawing (see 6.6.1 herein). For device class M, a certificate of

compliance shall be required from a manufacturer in order to be listed as an approved source of supply in MIL-HDBK-103 (see

6.6.2 herein). The certificate of compliance submitted to DSCC-VA prior to listing as an approved source of supply for this

drawing shall affirm that the manufacturer's product meets, for device classes Q and V, the requirements of MIL-PRF-38535

and herein or for device class M, the requirements of MIL-PRF-38535, appendix A and herein.

3.7 Certificate of conformance. A certificate of conformance as required for device classes Q and V in MIL-PRF-38535 or for

device class M in MIL-PRF-38535, appendix A shall be provided with each lot of microcircuits delivered to this drawing.

3.8 Notification of change for device class M. For device class M, notification to DSCC-VA of change of product (see 6.2

herein) involving devices acquired to this drawing is required for any change as defined in MIL-PRF-38535, appendix A.

3.9 Verification and review for device class M. For device class M, DSCC, DSCC's agent, and the acquiring activity retain

the option to review the manufacturer's facility and applicable required documentation. Offshore documentation shall be made

available onshore at the option of the reviewer.

3.10 Microcircuit group assignment for device class M. Device class M devices covered by this drawing shall be in

microcircuit group number H (see MIL-PRF-38535, appendix A).

SIZE

STANDARD

5962-95592

MICROCIRCUIT DRAWING

DEFENSE SUPPLY CENTER COLUMBUS

COLUMBUS, OHIO 43216-5000

REVISION LEVEL

SHEET

DSCC FORM 2234

APR 97

1 2 345 6 7...12

下载PDF

与AD677JNZ相关器件

型号	品牌	描述	获取价格	数据表
AD677JR	ADI	16-Bit 100 kSPS Sampling ADC	获取价格
AD677JR	ROCHESTER	1-CH 16-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO28, PLASTIC, SOIC-28	获取价格
AD677JR-REEL	ROCHESTER	1-CH 16-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, PDSO28, PLASTIC, SOIC-28	获取价格
AD677JRZ	ETC	MICROCIRCUIT, DIGITAL-LINEAR, FAST, SERIAL, 16-BIT, A/D CONVERTER, MULTICHIP SILICON	获取价格
AD677JRZ-REEL	ADI	16-Bit, Serial, 100 kSPS Sampling ADC.	获取价格
AD677KD	ROCHESTER	1-CH 16-BIT SUCCESSIVE APPROXIMATION ADC, SERIAL ACCESS, CDIP16, SIDE BRAZED, CERAMIC, DIP	获取价格

与AD677JNZ相关文章

PCF8574资料解读：主要参数分析、引脚说明
2024-05-21

3
AD637数据手册解读：主要特性、引脚及其功能解读、电气参数
2024-05-21

4
ADUM1201资料手册解读：参数分析、引脚说明、应用分析
2024-05-21

7
一文带你了解压敏电阻器在直流电路中的过压保护作用
2024-05-21

3

产品中心

服务支持

精选活动

关于我们

帮助中心

AD677JNZ

AD677JNZ 技术参数

AD677JNZ 数据手册

与AD677JNZ相关器件

与AD677JNZ相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

AD677JNZ

AD677JNZ 技术参数

AD677JNZ 数据手册

与AD677JNZ相关器件

与AD677JNZ相关文章

您还可以找

您在本页遇到什么问题？