Quad, 16-Bit nanoDAC+
with 4 ppm/°C Reference, SPI Interface
Enhanced Product
AD5686R-EP
FEATURES
FUNCTIONAL BLOCK DIAGRAM
V
GND
V
REF
DD
High relative accuracy (INL): 4 LSB maximum at 16 bits
Low drift 2.5 V reference: 4 ppm/°C typical
Tiny package: 3 mm × 3 mm, 16-lead LFCSP
Total unadjusted error (TUE): 0.1ꢀ of FSR maximum
Offset error: 1.5 mV maximum
Gain error: 0.1ꢀ of FSR maximum
High drive capability: 15 mA, 0.5 V from supply rails
User selectable gain of 1 or 2 (GAIN pin)
Reset to zero scale or midscale (RSTSEL pin)
1.8 V logic compatibility
2.5V
AD5686R-EP
REFERENCE
V
LOGIC
STRING
DAC A
INPUT
REGISTER
DAC
V
V
V
V
A
B
C
D
OUT
OUT
OUT
OUT
REGISTER
SCLK
SYNC
SDIN
SDO
BUFFER
BUFFER
BUFFER
BUFFER
STRING
DAC B
INPUT
REGISTER
DAC
REGISTER
STRING
DAC C
INPUT
REGISTER
DAC
REGISTER
STRING
DAC D
INPUT
REGISTER
DAC
REGISTER
50 MHz SPI with readback or daisy chain
Low glitch: 0.5 nV-sec
Low power: 3.3 mW at 3 V
POWER-ON
RESET
GAIN
×1/×2
POWER-
DOWN
LOGIC
LDAC RESET
RSTSEL
GAIN
2.7 V to 5.5 V power supply
Figure 1.
ENHANCED PRODUCT FEATURES
Supports defense and aerospace applications (AQEC)
Temperature range: −55°C to +125°C
Controlled manufacturing baseline
1 assembly/test site
1 fabrication site
Enhanced product change notification
Qualification data available on request
APPLICATIONS
Optical transceivers
Base-station power amplifiers
Process control (PLC input/output cards)
Industrial automation
Data acquisition systems
reduces the current consumption of the device to 4 μA at 3 V
while in power-down mode.
GENERAL DESCRIPTION
The AD5686R-EP, a member of the nanoDAC+® family, is a low
power, quad, 16-bit buffered voltage output digital-to-analog
converter (DAC). The device includes a 2.5 V, 4 ppm/°C internal
reference (enabled by default) and a gain select pin giving a full-
scale output of 2.5 V (gain = 1) or 5 V (gain = 2). The device
operates from a single 2.7 V to 5.5 V supply, is guaranteed
monotonic by design, and exhibits less than 0.1% FSR gain error
and 1.5 mV offset error performance. The device is available in
a 3 mm × 3 mm LFCSP package.
The AD5686R-EP employs a versatile serial peripheral interface
(SPI) that operates at clock rates up to 50 MHz, and contains a
V
LOGIC pin that is intended for 1.8 V/3 V/5 V logic.
Additional application and technical information can be found
in the AD5686R/AD5685R/AD5684R data sheet.
PRODUCT HIGHLIGHTS
1. High Relative Accuracy (INL).
4 LSB maximum.
2. Low Drift 2.5 V On-Chip Reference.
4 ppm/°C typical temperature coefficient.
13 ppm/°C maximum temperature coefficient.
The AD5686R-EP also incorporates a power-on reset circuit and a
RSTSEL pin that ensures that the DAC outputs power up to zero
scale or midscale and remains there until a valid write occurs.
The device contains a per-channel power-down feature that
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2015–2016 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com