ACPL-M483/P483/W483
Inverted Logic High CMR Intelligent Power Module
and Gate Drive Interface Optocoupler
Data Sheet
Description
Features
The ACPL-M483/P483/W483 fast speed optocoupler Inverted output type (totem pole output)
contains a AlGaAs LED and photo detector with built-in
Schmitt trigger to provide logic-compatible waveforms,
eliminating the need for additional wave shaping. The
totem pole output eliminates the need for a pull up
Truth Table Guaranteed: Vcc from 4.5 V to 30 V
Performance Specified for Common IPM Applications
Over Industrial Temperature Range.
resistor and allows for direct drive of Intelligent Power Short Maximum Propagation Delays
Module or as a gate driver. Minimized propagation delay
difference between devices makes these optocouplers
excellent solutions for improving inverter efficiency
Minimized Pulse Width Distortion (PWD)
Very High Common Mode Rejection (CMR)
through reduced switching dead time.
Hysteresis
Available in SO-5 (ACPL-M483) and Stretched SO-6
Applications
package (ACPCL-P483/W483).
IPM Interface Isolation
Package Clearance/Creepage at 8 mm (ACPL-W483)
Safety Approval:
Isolated IGBT/MOSFET Gate Drive
AC and Brushless DC Motor Drives
Industrial Inverters
– UL Recognized with 5000 V
minute per UL1577.
(ACPL-W483) for 1
rms
– CSA Approved.
General Digital Isolation
– IEC/EN/DIN EN 60747-5-5 Approved with V
=
for
IORM
Functional Diagram
567 V
ACPL-P483 and V
for ACPL-M483 and V
= 891 V
for ACPL-W483,
peak
IORM
peak
peak
= 1140 V
IORM
ACPL-M483
under option 060.
Anode
1
3
6
5
4
VCC
Note: A 0.1 F bypass
capacitor must be con-
nected between pins Vcc
and Ground.
Specifications
VO
Cathode
Ground
SHIELD
Wide operating temperature range: -40°C to 105°C.
Maximum propagation delay t /t = 120/120 ns
PHL PLH
Truth Table
Maximum Pulse Width Distortion (PWD) = 50 ns.
ACPL-P483 & ACPL-W483
(Negative Logic)
Propagation Delay Difference Min/Max = –100/100 ns
Anode
N.C.
1
2
3
6
5
4
VCC
LED
ON
V
O
LOW
Wide Operating V Range: 4.5 to 30 Volts
CC
VO
30 kV/s minimum common mode rejection (CMR) at
Cathode
Ground
SHIELD
OFF
HIGH
V
= 1000 V.
CM
Truth Table Guaranteed:
Vcc from 4.5 V to 30 V
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.