ACPL-782T
Automotive Isolation Amplifier
2
with R Coupler™ Isolation
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
Features
ꢄ
2ꢀ ꢁain Tolerance @ 25°C
The ACPL-782T isolation amplifier was designed for
voltage and current sensing in electronic motor drives
and battery system monitoring. In a typical implementa-
tion, and motor currents flow through an external resistor
and the resulting analog voltage drop is sensed by the
ACPL-782T. A differential output voltage is created on the
other side of the ACPL-782T optical isolation barrier. This
differential output voltage is proportional to the motor
current and can be converted to a single-ended signal
by using an op-amp as shown in the recommended ap-
plication circuit. Since common-mode voltage swings
of several hundred volts in tens of nanoseconds are
common in modern switching inverter motor drives, the
ACPL-782T was designed to ignore very high common-
mode transient slew rates (of at least 10 kV/ꢀs).
ꢄ 15 kV/ꢀs Common-Mode Rejection at V = 1000V
ꢄ 30ppm/°C ꢁain Drift vs. Temperature
ꢄ 0.3 mV Input Offset Voltage
ꢄ 100 kHz Bandwidth
ꢄ 0.004ꢀ Nonlinearity
CM
ꢄ Compact, Auto-Insertable Standard 8-pin DIP Package
ꢄ Worldwide Safety Approval:
– UL 1577 (3750 V /1 min.) and
RMS
– CSA
– IEC 60747-5-5, DIN EN 60747-5-2(VDE 0884 Teil 2)
ꢄ Qualified to AEC-Q100 Test ꢁuidelines
ꢄ Automotive Operating Temperature -40 to 125°C
ꢄ Advanced Sigma-Delta (ꢁꢂꢃ) A/D Converter Technology
ꢄ Fully Differential Circuit Topology
The high CMR capability of the ACPL-782T isolation
amplifier provides the precision and stability needed to ac-
curately monitor motor current and DC rail voltage in high
noise motor control environments, providing for smoother
control(less“torqueripple”)invarioustypesofmotorcontrol
applications.
Applications
ꢄ Automotive Motor Inverter Current/Voltage Sensing
ꢄ Automotive AC/DC and DC/DC converter Current/
Voltage sensing
The product can also be used for general analog signal
isolation applications requiring high accuracy, stability,
and linearity under similarly severe noise conditions. The
ACPL-782T utilizes sigma delta (ꢁꢂꢃ) analog-to-digital
converter technology, chopper stabilized amplifiers, and
a fully differential circuit topology.
ꢄ Automotive Battery ECU
ꢄ Automotive Motor Phase Current Sensing
ꢄ Isolation Interface for Temperature Sensing
ꢄ ꢁeneral Purpose Current Sensing and Monitoring
Functional Diagram
Together, these features deliver unequaled isolation-
mode noise rejection, as well as excellent offset and
gain accuracy and stability over time and temperature.
This performance is delivered in a compact, auto-insert-
able, industry standard 8-pin DIP package that meets
worldwide regulatory safety standards. (A gull-wing
surface mount option -300E is also available).
IDD1
IDD2
VDD1
VIN+
VIN-
8
7
VDD2
1
2
VOUT+
+
-
+
-
3
4
6
5
VOUT-
GND1
GND2
2
Avago R Coupler isolation products provide the rein-
SHIELD
forced insulation and reliability needed for critical in auto-
motive and high temperature industrial applications.
The connection of a 0.1 ꢀF bypass capacitor between
pins 1 and 4, pins 5 and 8 is recommended.
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.