AAT3520/2/4
MicroPower Microprocessor Reset Circuit
Absolute Maximum Ratings (TA=25°C unless otherwise noted)
Symbol
Description
Value
Units
VCC
VCC to GND
-0.3 to 5.5
-0.3 to VCC+0.3
-0.3 to 5.5
20
V
V
RESET to GND (Push-Pull Output)
RESET to GND (Open Drain Output)
Maximum Continuous Input Current
RESET/RESET Current
Rate of rise of Vcc
Operating Junction Temperature Range
Maximum Soldering Temperature (at Leads) for 10s
VRESET
IMAX
IRESET
dVcc/dt
TJ
mA
mA
V/µs
°C
20
100
-40 to 150
300
TLEAD
°C
Note: Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the device. Functional operation at con-
ditions other than the operating conditions specified is not implied. Only one Absolute Maximum rating should be applied at any one time.
Thermal Information
Symbol
Description
Maximum Thermal Resistance (SOT23-3)1
Maximum Power Dissipation (SOT23-3)1
Value
200
320
Units
°C/W
mW
ΘJA
PD
Note 1: Mounted on an FR4 board.
Electrical Characteristics (VIN = 5V, TA = -40 to 85°C unless otherwise noted. Typical values
are at TA=25°C, VCC = 5V for 4.63/4.38V versions, VCC = 3.3V for 3.08/2.93V versions, VCC = 3.0V for 2.63V
version and VCC = 2.5V for 2.32/2.2V versions )
Symbol Description
Conditions
Min
Typ
Max
Units
TA = 0ºC to +70ºC
TA = -40ºC to +85ºC
1.0
1.2
5.5
5.5
3
VCC
IQ
Operation Voltage
V
V
CC = 5.5V
1.05
0.85
Quiescent Current
µA
V
VCC = 3V
TA = 25ºC
TA = -40ºC to +85ºC
2
VTH -1.5ꢀ VTH VTH +1.5ꢀ
VTH -2.5ꢀ VTH VTH +2.5ꢀ
VTH
RESET Threshold (Table 1)
∆VTH/°C
RESET Threshold Tempco
RESET Propagation Delay
40
15
50
ppm/°C
µs
tP
VCC = VTH to (VTH -100mV)
-50 option
-200 option
30
150
100
400
0.3
tRDY
RESET Active Timeout Period
ms
250
ISINK =1.6mA, VCC > 2.1V,
RESET Low Output Voltage
AAT3522, AAT3524
RESET asserted
ISINK =100µA, VCC >1.2V,
RESET asserted
VOL
VOH
V
V
0.4
RESET High Output Voltage
AAT3522
ISOURCE = 800 µA
VCC -1.5
I
SINK =1.2mA, VCC > 1.2V,
0.3
0.4
RESET Low Output Voltage
AAT3520
RESET not asserted
ISINK = 3.2mA, VCC > 4.5V,
RESET not asserted
VOL
V
ISOURCE = 500µA, VCC > 2.1V, 0.8VCC
RESET High Output Voltage
AAT3520
RESET asserted
ISOURCE = 50µA, VCC > 1.2V,
RESET asserted
VOH
V
0.8VCC
IDOFF
RESET leakage current, AAT3524 VCC > VTH
1
µA
3520.2002.2.0.9
3