PRODUCT DATASHEET
AAT3195
TM
ChargePump
4-Channel Charge-Pump LED Driver
temperature. Larger capacitor values are usually com-
posed of X7R, X5R, Z5U, or Y5V dielectric materials.
Large ceramic capacitors (i.e., larger than 2.2μF) are
often available in low cost Y5V and Z5U dielectrics, but
capacitors larger than 1μF are not typically required for
AAT3195 applications.
Equivalent Series Resistance
ESR is an important characteristic to consider when
selecting a capacitor. ESR is a resistance internal to a
capacitor that is caused by the leads, internal connec-
tions, size or area, material composition, and ambient
temperature. Capacitor ESR is typically measured in mil-
liohms for ceramic capacitors and can range to more
than several ohms for tantalum or aluminum electrolytic
capacitors.
Capacitor area is another contributor to ESR. Capacitors
that are physically large will have a lower ESR when
compared to an equivalent material smaller capacitor.
These larger devices can improve circuit transient
response when compared to an equal value capacitor in
a smaller package size.
Ceramic Capacitor Materials
Ceramic capacitors less than 0.1μF are typically made
from NPO or C0G materials. NPO and C0G materials
generally have tight tolerance and are very stable over
w w w . a n a l o g i c t e c h . c o m
3195.2008.09.1.0
13