AAP803Ax
Electret Condenser Microphone Pre-Amplifer
Features
Description
.
Adjustable Voltage Gain up to 27dB, 100Hz
The AAP803AX ECM microphone preamplifier is a
chip-scale device developed specifically for
to 10kHz
integrating in small form factor two terminal electret
condenser microphones.
.
.
Quiescent Current 125µA
Low Voltage Operation 1.5V with 450Ω
Load
The AAP803Ax preamplifier provides reduced input
capacitance, improved noise performance and larger
output swing at a lower supply voltage.
.
.
.
Low Input Capacitance 0.7pF
Low Output Impedance <30Ω
The AAP803Ax is offered in two versions with the part
numbers AAP803A1 and AAP803A3. The AAP803A1
has 3 gain settings (low, mid and high and the A3 has
2 gain settings (mid and max) both are designed with
low quiescent current consumption for use in lower
power typically battery powered applications. The gain
setting is done by selecting the proper FB pin for the
signal path (1, 2, or 1 and 2).
Low Noise <1.3µV RMS Input Noise (A-
weighted, input shorted)
.
.
ESD Protection 7.5kV Minimum at Output
High Pass, Low Pass and Band Pass
Filtering with External Components
.
RoHS Compliant & Halogen Free
The AAP803Ax is provided in a chip scale SMD
package. The package size is 820µm x 550µm; with
an overall height of 315µm including solder bumps.
This extremely small package size and aspect ratio is
optimum for use in small diameter microphones.
Applications
. Small Diameter Electret Microphones
Available for purchase in either waffle pack for low
volume orders or in tape & reel for larger quantities.
Functional Block Diagram
CC
VDD
HPF
FB1
FB2
RL
Microphone
IN
OUT
AGND
AAP803Ax
Figure 1 · Functional Block Diagram
October 2014 Rev. 1.1
www.microsemi.com
1
© 2013 Microsemi Corporation- Analog Mixed Signal Group