Skyhawk A2111
Features
WIS Layer Processing
Line-Side Interface
• Support for all WIS framing and frame
• Support for two configurations
synchronization functions
• Standard XSBI (SFI-4) 16-bit, 622.08 MHz,
LVDS interface for 10 GbE WAN PHY mode
• Complete section, line, and path overhead layer
• Standard XSBI 16-bit, 644.53 MHz, LVDS
termination
interface for 10 GbE LAN PHY mode
• Generation and verification of BIP-8 parity
System-Side Interfaces
• Pointer processing for receive payload extraction
• Selectable XGMII interface: HSTL2 or SSTL
and transmit payload mapping
CPU Interface
• Extraction and insertion of transport and path
overhead from/to dedicated external pins or from
registers
• 32-bit synchronous CPU interface; support for both
Intel and Motorola-type processors
• MDIO and MDC management interface and
• WIS alarm insertion and detection
registers
• Frame-synchronous X7 + X6 + 1 scrambling and
Test and Diagnostic Support
descrambling
• Built-in pattern generators and verifiers
• Multiple diagnostic loopbacks
• Error rate monitoring
10 GbE Processing
• IEEE 1149.1 port with memory BIST, scan, and
JTAG boundary scan
• 10 GbE WAN and LAN PHY functionality
General Specifications
• Complete PCS-R and PCS-W functionality
including:
• Packaging: 672-pin flip-chip BGA
• 64b/66b encoding and decoding
• X58 + X39 + 1 scrambling and descrambling
• 66:16 gearboxing
• Technology: low-power CMOS 1.8V, 3.3V-tolerant
I/Os on CPU and other interfaces
• Ambient operating temperature: 0°C to 70°C
• Power dissipation: 3.5 W max, 2.7 W typical
• Block synchronization
• Rate matching
Standards Compliance
• Block_lock detection
• Remote and local fault handling
• IEEE 802.3ae-D3.1 draft specification
• ANSI T1.416 – 1999
Applications
• 10 GbE LAN or WAN switching equipment
• 10 GbE WAN or LAN PHYs
• Multiservice switches
• Uplink cards
• Ethernet line-terminating equipment (ELTE)
• Edge and core routers
• 10 GbE test equipment
Confidential and Proprietary
Ample Communications
4034 Clipper Court • Fremont, CA 94538
Phone: 510-657-1500 • Email: info@amplecomm.com
7/8/02