Datasheet > A-2301UB

A-2301UB

更新时间： 2022-02-26 15:00:09

阅读下载

获取价格

如果您发现信息不准确，欢迎纠错

A-2301UB 数据手册

Release

PARALIGHTDCC

2.24 INCH SINGLE DIGIT DISPLAY

REV:A / 0

A-2301UB B/W

4) User shall not reverse engineer by disassembling or analysis of the Display without having prior

written consent from PARA. When defective Display are found, the User shall inform PARA

directly before disassembling or analysis.

5) The formal specifications must be exchanged and signed by both parties before large volume

purchase begins.

6) The appearance and specifications of the product may be modified for improvement without

notice.

— STATIC ELECTRICITY

1) Static electricity or surge voltage damages the Display.

It is recommended that a wrist band or an anti-electrostatic glove be used when handling the

Display.

2) All devices, equipment and machinery must be properly grounded. It is recommended that

measures be taken against surge voltage to the equipment that mounts the Display.

3) When inspecting the final products in which Display were assembled, it is recommended to check

whether the assembled Display are damaged by static electricity or not. It is easy to find

static-damaged Display by a light-on test or a VF test at a lower current (below 1mA is

recommended).

4) Damaged Display will show some unusual characteristics such as the leak current remarkably

increases, the forward voltage becomes lower, or the Display do not light at the low current .

Criteria : ( VF>2.0V at IF=0.5mA )

DRAWING NO. : DS-11-10-0020

DATE : 2010-04-12

Page : 10

1...7 8 910

下载PDF