Battery Master Switch BMS01
Description
The BMS01 is a battery master switch designed for dangerous goods road
vehicles complying with international ADR regulations. Environmental
protection and the intrinsically safe control circuitry of the BMS01 are
in accordance with ADR 2015. The battery switch must be installed
between the battery and the vehicle’s electrical system. It is operated
on and off by means of a control switch in the driver’s cab, additional
control switches can be sited around the vehicle as required. The
BMS01 is a double pole device, but can be connected as 1-pole
version (see connection diagram).
An integral safety barrier permits siting of the BMS01 in hazardous
areas. Additional auxiliary contacts are provided for disconnection of
the ignition circuit, de-energisation of the alternator field winding, or a
controlled shutdown of the CANBUS system followed after a delay by
disconnection of the battery.
BMS01
Typical applications
Technical data
Utility vehicles for hazardous goods.
Operating data
Voltage rating
2
DC 12 V
DC 24 V
18...32 V
Voltage range
9...16 V
Ordering information
Rated current
200 A / pole
Type number
BMS01 Battery Master Switch (to ADR 2015)
Number of poles
Max. overload current
2,400 A 1 s; 600 A 20 s
Power consumption of
electronic module
2
2-pole
Rated voltage
typically 5 mA (in OFF condition)
Excitation current / time of
the bistable main relay
0
1
DC 12 V
DC 24 V
Control function: delay time between
auxiliary contact K13 and main contacts
12 V:
24 V:
typically 2.6 A / 200 ms
typically 1.3 A / 200 ms
1
2
5
1 sec / ADR-compliant
9.5 sec / ADR-compliant
180 sec / version for SCRT (BlueTec) motors
Control circuit (EX)
Temperature range
ZELM 04 ATEX 0213X
Ex II (2) G [Ex ib] II C
Control function: low voltage monitoring
-40...+70 °C (-40...+158 °F)
0
1
without low voltage monitoring
Reverse polarity protection integral (in the event of reverse polarity
the master switch will disconnect
with low voltage monitoring and disconnection -
device switches off in undervoltage condition
with low voltage monitoring and signalisation
Version
3
instantaneously)
Low voltage monitoring
switching thresholds:
hysteresis:
DC 12 V
DC 24 V
0
neutral
11.0 V 0. 3 V 22.8 V 0.3 V
typically 0.25 V typically 0.5 V
typically 60 sec typically 60 sec
BMS01 -
2
1
1
1 -
0
ordering example
trip time:
Typical life
10,000 cycles at rated current
100,000 cycles without load
Rubber caps and mounting screws are supplied with the product.
Accessories (e.g. external control switch, 7-pole and 4-pole connectors) should be
ordered separately.
Protection class: housing
Protection class: terminals
IP65
IP54 with rubber caps
Vibration
5 g (57-200 Hz), 0.38 mm (10-57 Hz),
test to IEC 60068-2-6, test Fc,
10 frequency cycles / axis
Approvals
Authority Standard
Rated voltage
Shock
10 g, test to IEC 60068-2-27, test Ea
Corrosion
96 hrs 5 % salt mist,
test to IEC 60068-2-11, test Ka
TÜV
- ADR 2015 Teil/part 9, 9.2.2 und /
and 9.7.8
- VdTÜV-Merkblatt 5205, Ausgabe /
edition 03.2015
- IEC 60079-0:2011
- IEC 60079-11:2011
- IEC 60529:2001
Humidity
240 hrs. 95 % RH,
test to IEC 60068-2-78, test Cab
Terminals
battery terminals:
control terminals:
M10 terminal studs
AUX connectors to DIN 72 585, 7-pole
CRTL connectors to DIN 72 585, 2-pole
KBA
ECE Regelung Nr. 10 (E1) Rev. 4
DC 12 V
DC 24 V
Auxiliary contact
max. 10 A (circuit unprotected)
ZELM
EN60079-0:2012+A11:2013
EN60079-11:2012
DC 12 V
DC 24 V
Aux. energy output for
permanently energised loads
(e.g. tachograph)
max. 1 A (internally protected)
approx. 1,700 g
Mass
Protection Class
IP65
1615
www.e-t-a.de
1
5秒后页面跳转
塔塔电子与力积电达成技术转让协议，携手建设印度首座晶圆厂
英特尔震撼发布：128核心256线程的至强6性能核处理器
SK海力士量产12层HBM3E，容量高达36GB
意法半导体传感器驱动Sphere，开启沉浸式电影新时代
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
