C&K 9000 Series
Power Toggle Switches
Features/Benefits
• Power ratings up to 10 AMPS
• Double pole models
Typical Applications
• Shut-off switch
• Small equipment
• Locking lever options available
• Wide variety of actuator styles
• RoHS compliant and compatible
Models Available
Specifications
Materials
CONTACT RATING: 9201 Model: 6 AMPS @ 120 V AC or
28 V DC; 3 AMPS @ 250 V AC. 9221 Model: 10 AMPS @
125 V AC or 28 V DC; 5 AMPS @ 250 V AC.
CASE: Diallyl phthalate (DAP) (UL 94V-0).
ACTUATOR: Brass, chrome plated.
BUSHING: Brass or zinc, nickel plated.
HOUSING: Stainless steel.
ELECTRICAL LIFE: 25,000 make-and-break cycles at full load.
CONTACT RESISTANCE: Below 10 m Ω typ. initial @
SWITCH SUPPORT: Brass or steel, matte-tin plated.
2-4 V DC, 100 mA.
END CONTACTS: 9201 Model: Coin silver, silver plated.
9221 Model: Silver cadmium oxide.
9
INSULATION RESISTANCE: 10 Ω min.
DIELECTRIC STRENGTH: 2,500 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 85ºC.
CENTER CONTACTS: Copper alloy, silver plated
ALL TERMINALS: 9201 Model: Copper alloy, silver plated.
9221 Model: Copper alloy, matte-tin plated.
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
TERMINAL SEAL: Epoxy.
NOTE: Any models supplied with Q contact material are RoHS compliant and compatible.
For the latest information regarding RoHS compliance, please go to:
www.ittcannon.com/rohs.
HARDWARE: Nut & Locking ring: Brass, nickel plated.
Lockwasher: Steel, nickel plated.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages G-49 thru G-53. For additional options not shown in catalog, consult Customer Service Center.
Switch Function
9201 DPDT, On-On, 6 Amps
9221 DPDT, On-On, 10 Amps
Actuator
S
K
Antirotation, .410" high
Locking lever, .650" high
Bushing
H3 .296" high, keyway
CW Splashproof
K1 Locking lever, .680" high
L43 Lever handle with cap
P3 Flatted, anti-rotation, .450" high
H
.296" high, flat
T
.687" high, 15/32 bushing
Terminations
Solder lug
T1 .460" high, 15/32 bushing
Z
Z4 Quick connect
(9221 only)
AV2 Vert. right angle, PC thru-hole
(9201 only)
Contact Material
Silver
Q
Seal
E
Epoxy
C
PC Thru-hole
D No epoxy
Actuator Color/Finish
NONE Bright chrome
Bushing Finish
NONE Nickel
2
Black
G
2
Black
KXX Actuator Color/Finish
NONE Natural aluminum
2
Black anodized aluminum
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
G–48