SOURIAU
851 for industry
Wiring instructions
Stripping instruction
This operation should be carried out with
great care. Use stripping pliers which are
designed for use with the size of wire
being stripped. In order to maintain the
connector’s sealing level and cable
retention, the wires should have the
external sheath dimensions conform to
table page 4.
Recommanded stripping length
L
Stamped & Formed
Machined
contacts
contacts
AWG 20 1 mm
L = 4 mm
L = 5 mm
L = 6 mm
Recommended conductor loading :
- 050 % with Max diameter wires
- 050 % with min diameter wires
- 100 % with medium size wires.
AWG 16 1.6 mm
L = 4 mm
Crimp contact insertion
• Slide all connector rear accessories over cables and sheath.
• Position the crimped contact into the plier jaws, the tip of the jaws butting the contact shoulder (in case of stamped & formed
contacts, please ask for a complementary wiring instruction liftet).
• Introduce contacts one by one in insert cavities pushing straight in until the contact snaps into position and the clip ensures contact
retention.
Insertion tools
8500 - 93B
Crimp contact extraction
• First dissassemble and slide connector rear accessory over cables and sheath.
• Do not operate the tool slide button.
• Bring the tool tip over the male or female contact to be removed from connector front (matting face) as far as the first mark for male
contacts and the second mark for female contacts.
• This operation should be carried out delicately in a direction parallel to the contact axis with a light turning action. Extract contact
pushing the slide button fully forward, carefully remove tool and pull wire to release the wire-contact assembly.
Extraction tools
AWG 16 1.6
AWG 20
8500 - 38A
8500 - 36A
1
9