C&K 8060 Series
Alternate Action and Momentary Pushbutton Switches
AVAILABLE HARDWARE
A
Fits Z3 Termination
female connector
PART NO.
530100000
Available in loose pieces.
Frames snap into panel opening and are independent from switch mounting. Accurate positioning of the PC
mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and
frame. Available in two basic styles and four panel thicknesses .047-.125 in. Material: Nylon. Finish: Matte.
TYPICAL APPLICATION
.047" (1,19) PANEL THK.
.062" (1,57) PANEL THK.
.090" (2,29) PANEL THK.
.125" (3,18) PANEL THK.
PART NO.
PART NO.
PART NO.
PART NO.
432502263
432602263
432702263
432802263 BLACK
Panel Inserts
Above frames (part nos. 432XXXXXX) are also available with insert which accepts LED for
indicator light assembly. Order insert separately from frame. Blank insert panel (without hole
for LED) also available. LED not included.
PANEL INSERT
BLANK PANEL INSERT
WITH HOLE FOR LED
WITHOUT HOLE FOR LED
PART NO.
PART NO.
894902000
476602000 BLACK
Special colors, custom markings available, consult Customer Service Center.
LED INFORMATION
SWITCHES WITH LED SUPPLIED: J86 OPTION:
Rectangular LEDs are supplied on 8060 Series pushbutton switches with J86 option. These LEDs are factory installed and are not replaceable.
The following specifications apply:
MAX RATINGS AT 25ºC AMBIENT TEMPERATURE
.025 SQ.
TYP. (0,63)
TYP.
TYP.
Flat denotes
cathode.
.200 DIA.
(5,08˘)
OPTION
CODE
TYP.
FORWARD FORWARD
VOLTAGE
FORWARD
VOLTAGE
CONTINUOUS
FORWARD CURRENT
POWER
DISSIPATION
COLOR INTENSITY
CURRENT
6
3
5
Green
Red*
1.0 mcd
0.5 mcd
4.0 mcd
20 mA
10 mA
20 mA
50 mA
30 mA
50 mA
125 mW
75 mW
.030
(0,76)
.230 DIA.
(5,84˘)
2.1 V
2.5 V
.750
(19,05)
.340
(8,64)
Yellow
125 mW
Process Information: Soldering to LED leads must be completed within 5 seconds at
500ºF (260ºC) maximum.
Suggested LED for J82 & J84 options.
Dimensions for reference only.
Caution: Circuit elements must limit forward current of LED to 50mA max. continuous.
* Extra-bright red LED available (typ. intensity 4.5 mcd), consult Customer Service Center.
LEDs are not supplied with J82 & J84 options. LED snaps into switch frame surrounding actuator and
is wired externally.
Third Angle
Projection
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ittcannon.com
A–59