Portable, Shielded SCC Module Carriers
NI SC-2345 Series
• Shielded carriers for up to 20
SCC modules
Operating Systems
• Windows 2000/NT/XP
• Portable, low-profile packaging
• Cables directly to an E Series or
Basic multifunction
DAQ device
• Powered by DAQ device
(additional power options available)
Recommended Software
• LabVIEW
• LabWindows/CVI
• Measurement Studio
• Lookout
• VI Logger
SC-2345 Connector Block
• Strain relief for signal wiring
• Hinged lid for easy access
Other Compatible Software
• Visual Basic
• C/C++, C#
SC-2345 Carrier with
Driver Software (included)
Configurable Connectors
• Panelettes for sensor connectivity
• Panelettes for control and display
• Blank panelettes for filler
• NI-DAQ 7
Overview
Sockets J17 through J20 access the two analog output channels and
The National Instruments SC-2345 Series consists of two types the GPCTR channels 0 and 1.
of carriers, the SC-2345 connector block and the SC-2345 with
configurable connectors. These enclosures for SCC signal
J1-J8
conditioning modules connect directly to 68-pin DAQ devices.
They include sockets for SCC modules, along with screw terminals
for convenient connection to digital I/O and counter/timer (GPCTR)
signals from the DAQ device. These carriers offer three power
options to increase the flexibility of deployment.
Single-stage
SCC Modules
J2
J8
J3
J5
J6 J7
J1
J18
J17
J4
J9-J16
A) Dual-stage
conditioning of
analog inputs, or
B) DIO Signal
Modules
SC-2345 Connector Block
The SC-2345 includes 20 SCC sockets, labeled J1 through J20 (see Figure
1). Sockets J1 through J8 accommodate SCC modules for conditioning
signals on the analog input channels of the DAQ device. For example, an
SCC module plugged into socket J1 conditions signals for channels 0 and
8 of the device.
J11 J12 J13
J14 J15 J16
Strain relief
J9
J10
J19 J20
You can use sockets J9 through J16 for either digital I/O modules or
dual-stage analog input conditioning. When using dual-stage
conditioning of analog inputs (for applicable modules), wire your input
signal to the first-stage module (in sockets J9 through J16).
The SC-2345 routes the output signal of the first-stage SCC module to
the input of the second stage SCC module internally (see Figure 2). When
using sockets J9 through J16 for digital I/O, simply plug in a digital SCC
module or the SCC-FT01 for custom digital applications.You can use any
combination of SCC digital input or digital output modules. The digital
I/O lines of E Series or Basic multifunction DAQ devices are configurable
for input and output on a line-by-line basis. You can also access the DIO
lines of the DAQ device using the screw terminal block.
Figure 1. Diagram of Socket Layouts on SC-2345 Connector Block
Analog SCC
Connected to J1
Second Stage
Analog SCC
Connected to J1
Inputs
First Stage
Analog SCC
Connected to J9
Signals routed to
the second stage
SCC internally
Inputs
A. Single-Stage Analog Input
SCC Configuration
B. Dual-Stage Analog Input
SCC Configuration
Figure 2. Single-Stage and Dual-Stage Analog Input SCC Configuration for the
SC-2345 Connector Block
266 National Instruments • Tel: (800) 433-3488 • Fax: (512) 683-9300 • info@ni.com • ni.com