752 Series
Surface Mount Resistor Network
Electrical & Environmental Specifications
Circuit Types
Bussed SRT [Schematic 1]
Isolated SRT [Schematic 3]
[Not available in 9 Pads Configuration]
Dual Terminator SRT [Schematic 5]
[Not available in DRT]
Bussed DRT [Schematic 1]
Isolated DRT [Schematic 3]
[Not available in 18 Pads configuration]
Environmental Parameters
Maximum
Delta R [%]
0.50
MIL-STD-202
Method
107 Condition B
Test
Test Description
Thermal Cycle
5 cycles -65°C to +125°C
Short Time Overload
Moisture Resistance
Load Humidity
0.50
0.50
1.00
1.00
1.00
0.25
0.25
0.25
2½ times rated working voltage for 5 seconds [100V maximum]
240 hours, 0.1 rated load, -10°C to +65°C, 90% RH
1,000 hours, 0.1 rated load, +70°C, 85% - 92% RH
240 hours @ +125°C, no load
106
High Temperture Exposure
Load Life
108 Condition F
2,000 hours @ +70°C, rated load
30 seconds @ +218°C, dwell
Resistance to Solder Heat
Mechanical Shock
Vibration
213 Condition I
204 Condition D
100g, 1m second, 3 shocks each plane
20g, 10Hz - 2,000Hz, 4 houes per plane
Immererse in +245°C ±5°C SAC305 solder pot for 30 sec.
≥ 2,000PSI
Leaching Test
No leach > 50% EIA/IS-703-4.13.B
Shear Test
NA
0.25
0.25
N/A
Low Temperature Storage
Low Temperature Operation
Flammability
24 hours @ -65°C, no load
45 minutes @ -65°C, full load
94V-0
Non-Fungus
Pass
Pass
Pass
---
MIL-STD-810C
Resistance to Solvents
Solderability
Isopropyl alcohol, Freon TMC
RMA Flux, +230°C, 5 seconds dip, 95% coverage
DOC# 008-0351-0 Rev. D
Page 3 of 8
©2017 CTS® Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test
equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.