74VHCV574FT
9. Absolute Maximum Ratings (Note)
Characteristics
Symbol
Note
Rating
Unit
Supply voltage
Input voltage
Output voltage
VCC
VIN
-0.5 to 7.0
-0.5 to 7.0
-0.5 to 7.0
-0.5 to VCC + 0.5
-50
V
V
V
VOUT
(Note 1)
(Note 2)
Input diode current
Output diode current
Output current
IIK
IOK
mA
mA
mA
mW
mA
(Note 3)
(Note 4)
±50
IOUT
PD
±50
Power dissipation
VCC/ground current
Storage temperature
180
ICC/IGND
Tstg
±100
-65 to 150
Note: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even
destruction.
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“HandlingPrecautions”/“DeratingConceptandMethods”)andindividualreliabilitydata(i.e. reliabilitytestreport
and estimated failure rate, etc).
Note 1: Output in OFF state.
Note 2: High (H) or Low (L) state. IOUT absolute maximum rating must be observed.
Note 3: VOUT < GND, VOUT > VCC
Note 4: 180 mW in the range of Ta = -40 to 85 . From Ta = 85 to 125 a derating factor of -3.25 mW/ shall be
applied until 50 mW.
10. Operating Ranges (Note)
Characteristics
Supply voltage
Symbol
Test Condition
Note
Rating
Unit
VCC
VIN
1.8 to 5.5
0 to 5.5
0 to 5.5
0 to VCC
-40 to 125
0 to 20
V
V
V
Input voltage
Output voltage
VOUT
(Note 1)
(Note 2)
Operating temperature
Input rise and fall times
Topr
dt/dv
VCC = 3.3 ± 0.3 V
VCC = 5 ± 0.5 V
ms/V
0 to 1
Note: The operating ranges must be maintained to ensure the normal operation of the device.
Unused inputs must be tied to either VCC or GND.
Note 1: Output in OFF state.
Note 2: High (H) or Low (L) state.
©2016 Toshiba Corporation
2016-08-05
Rev.2.0
4