Warnings
1. This product shall be used within its absolute maximu m rating (voltage, current, and
temperature). This product may be broken in case of using beyond the ratings.
製品の絶対最大定格(電圧,電流,温度等)の範囲内で御使用下さい。絶対最大定格を超えて使用すると、素
子が破壊する場合があります。
2. Connect adequate fuse or protector of circuit between three-phase line and this
product to prevent the equipment from causing secondary destruction.
万一の不慮の事故で素子が破壊した場合を考慮し、商用電源と本製品の間に適切な容量のヒューズ
又はブレーカーを必ず付けて2次破壊を防いでください。
3. When studying the device at a no rmal turn-off action, make sure that working
paths of the turn-off voltage and current are within the RBSOA specification. And,
when studying the device duty at a short
-circuit current non -repetitive
interruption, make sure that the paths are also within the avalanche proof (PAV)
specification which is calculated from the snubber inductance, the IPM inner
inductance and the turn -off current. In case of use of IGBT -IPM over these
specifications, it might be possible to be broken.
通常のターンオフ動作における素子責務の検討の際には、ターンオフ電圧・電流の動作軌跡が RBSOA
仕様内にあることを確認して下さい。また、非繰返しの短絡電流遮断における素子責務の検討に際して
は、スナバーインダクタンスとIPM内部インダクタンス及びターンオフ電流から算出されるアバランシェ耐
量(PAV)仕様内である事を確認して下さい。これらの仕様を越えて使用すると、素子が破壊する場合が
あります。
4. Use this product after realizing enough working on environment and considering of
product's reliability life. This product may be broken before target life of the
system in case of using beyond the product's reliability life.
製品の使用環境を十分に把握し、製品の信頼性寿命が満足できるか検討の上、本製品を適用して下さ
い。製品の信頼性寿命を超えて使用した場合、装置の目標寿命より前に素子が破壊する場合がありま
す。
5. If the product had been used in the environment with acid, organic matter, and
corrosive gas (For example : hydrogen sulfide, sulfurous acid gas), the product's
performance and appearance can not be ensured easily.
酸・有機物・腐食性ガス(硫化水素,亜硫酸ガス等)を含む環境下で使用された場合、製品機能・外観
などの保証は致しかねます。
6. Use the product within the power cycle curve (Technical Rep.No. : MT6M4057)
本製品は、パワーサイクル寿命カーブ以下で使用下さい(技術資料 No.: MT6M4057)
a
Fuji Electric Co.,Ltd.
21/22
MS6M0702