MODEL: 6DVI-B
3: PG 13.5
Field-mounted Two-wire Signal Conditioners 6-UNIT
[4] MOUNTING BRACKET
0: Without
4-DIGIT LOOP POWERED INDICATOR
(outdoor enclosure, intrinsically safe)
Functions & Features
1: With
• 4-digit LED display
• No external power source needed
• Scaling, linearization and other configurations selectable
via three front control buttons
[5] OPTIONS
Enclosure Materials
Blank: Diecast aluminium enclosure
/S: Stainless steel enclosure
• Stainless steel enclosure optional
Note: Differences between the 6DV-B and the 6DVI-B exist
only in safety parameters. Refer to the relevant section for
more information.
PACKAGE INCLUDES...
• Mounting screws
Bolt (M8 x 15): 4 pcs.
Spring washer for M8: 4 pcs.
• Mounting bracket assembly (option)
Mounting bracket: 1
M10 U-bolt: 2
Nut for M10: 4
Spring washer for M10: 4
Material: Stainless steel 304 (for aluminum enclosure)
Stainless steel 316 (for stainless steel enclosure)
Applicable pipe: 1 1/2” min.; 2” max.
• Engineering unit label (1)
GENERAL SPECIFICATIONS
Degree of protection: NEMA 4X, IP66/IP67
Wiring conduit: See ‘Ordering information.’
Electrical connection:
MODEL:6DVI–B–[1][2][3][4][5]
ORDERING INFORMATION
• Code number: 6DVI-B-[1][2][3][4][5]
• Without terminal block: Euro terminal block (Applicable
Specify a code from below for each of [1] through [5].
(e.g. 6DVI-B-2T01/S)
wire size: 0.14 – 1.5 mm
2
(AWG26 – 16), stripped length 6
mm)
• Use Ordering Information Sheet (No. ESU-4220). Factory
standard setting will be used if not otherwise specified.
• Specify the country in which the product is to be used with
the Safety Approval code 2.
• With terminal block:
M3 screw terminal (torque 0.5 N·m)
Screw terminal:
• With terminal block: Nickel-plated steel
Materials
Meter housing: Flame-resistant resin (black)
Enclosure: Diecast aluminium standard; stainless steel
casting optional (equivalent to type 316); silver color, epoxy
resin coated
[1] SAFETY APPROVAL
1: FM intrinsically safe
2: ATEX intrinsic safety
Isolation: Input to outdoor enclosure
Linearization: Proportional, SQRT (X1/2), RT32 (X3/2), RT52
(X5/2), user’s linearization table (max. 21 calibration points)
(Default setting: Proportional)
[2] TERMINAL BLOCK
0: None (Euro type terminal block at the rear of indicator module)
T: Incorporated
A/D conversion: Dual-slope integration
Security: Protecting settings
[3] WIRING CONDUIT
0: G 1/2
Scaling: Programming via the front buttons
1: 1/2 NPT
2: M20 × 1.5
6DVI-B SPECIFICATIONS
ES-4214 Rev.6 Page 1/8
http://www.m-system.co.jp/