1. SCOPE
1.1 Scope. This drawing documents five product assurance classes, class D (lowest reliability), class E, (exceptions), class G
(lowered high reliability), class H (high reliability), and class K, (highest reliability) and a choice of case outlines and lead finishes
which are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of radiation hardness
assurance levels are reflected in the PIN.
1.2 PIN. The PIN shall be as shown in the following example:
5962
-
½
½
½
00528
01
½
½
H
½
½
½
X
½
½
X
½
½
½
½
½
½
½
½
Federal
stock class
designator
\
RHA
designator
(see 1.2.1)
Device
type
(see 1.2.2)
Device
class
designator
(see 1.2.3)
Case
outline
(see 1.2.4)
Lead
finish
(see 1.2.5)
/
\/
Drawing number
1.2.1 Radiation hardness assurance (RHA) designator. RHA marked devices shall meet the MIL-PRF-38534 specified RHA
levels and shall be marked with the appropriate RHA designator. A dash (-) indicates a non-RHA device. Only the RHA levels
specified herein are available. See 4.3.5.
1.2.2 Device type(s). The device type(s) identify the circuit function as follows:
Device type
01
Generic number
SLH2815S
Circuit function
DC-DC converter, 1.5 W, 15 V output
1.2.3 Device class designator. This device class designator shall be a single letter identifying the product assurance level as
follows:
Device class
Device performance documentation
D, E, G, H, or K
Certification and qualification to MIL-PRF-38534
1.2.4 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows:
Outline letter
X
Descriptive designator
See figure 1
Terminals
7
Package style
Dual-in-line
1.2.5 Lead finish. The lead finish shall be as specified in MIL-PRF-38534.
1.3 Absolute maximum ratings. 1/
Input voltage range.........................................................................
Power dissipation (PD)....................................................................
Output power..................................................................................
Lead soldering temperature (10 seconds).....................................
Storage temperature range............................................................
-0.5 V dc to +50 V dc
1.5 W
1.56 W
+300°C
-65°C to +150°C
1/ Stresses above the absolute maximum ratings may cause permanent damage to the device. Extended operation at the
maximum levels may degrade performance and affect reliability.
SIZE
STANDARD
MICROCIRCUIT DRAWING
5962-00528
A
REVISION LEVEL
SHEET
DEFENSE SUPPLY CENTER COLUMBUS
COLUMBUS, OHIO 43216-5000
2
DSCC FORM 2234
APR 97