SEMICONDUCTOR
5.0SMDJXX(C)A
TECHNICAL DATA
Surface Mount Transient Voltage Suppressor Rectifiers
Peak Pulse Power 5000W Stand-off Voltage 11.0 to 400V
Features
● Glass passivated chip
DO-214AB/(SMC)
● 5000 W peak pulse power capability with a 10/1000us
waveform, repetitive rate (duty cycle):0.01 %
● Excellent clamping capability
● Low reverse leakage
● Very fast response time
● Lead and body according with RoHS standard
Mechanical Data
● Case: DO-214AB/(SMC) Molded plastic
● Lead: Solderable per MIL-STD-750, method 2026
● Epoxy: UL 94V-0 rate flame retardant
Unit: inch (mm)
● Polarity: Color band denotes cathode end except Bipolar
● Mounting position: Any
Maximum Ratings & Characteristics
(Ratings at 25℃ ambient temperature unless otherwise specified)
Parameter
Symbols
Value
Unit
Peak power dissipation with a 10/1000 us waveform(1)
Peak pulse current wih a 10/1000 us waveform(1)
PPP
IPP
5000
See Next Table
6.5
W
A
Power dissipation on infinite heatsink at TL = 75 °C
PD
W
A
Peak forward surge current, 8.3 ms single half sinewave
unidirectional only(2)
IFSM
300
Maximum instantaneous forward voltage at 100 A for
unidirectional only(3)
VF
3.5/6.5
V
Operating junction and storage temperature range
TJ,TSTG
-55 to +150
℃
Note:
1)Non-repetitive current pulse per Fig.5 and derated above TA= 25 °C per Fig.1;
2)Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum;
3)VF<3.5V for devices of VBR<200V and VF<6.5V for devices of VBR>201V。
2019. 12. 06
Revision No : 0
1/3