CommercialVehicle Product Datasheet
FlexMod™ SMART BATTERY ISOLATOR CONTROLLER
Electrical Characteristics
CHARACTERISTIC
Operating voltage (12V)
MIN
TYPICAL
MAX
NOTES
9V
12V
32V
Operating voltage is the system voltage
12.7
25.4
When voltage drops below 12.7V (25.4V), for 1 minute,
the isolator disconnects the solenoid/relay.
Disconnect voltage (12V 24V)
Connect voltage (12V 24V)
13.2
26.4
When either of the battery banks rises above 13.2V (26.4V)
for 2 minutes, the isolator connects the solenoid/relay.
Quiescent Current
Load Current
1mA
2mA
Circuit operating current
10A at 85°C
Overcurrent Protection
Status light load
15A
System will disconnect after 1 second of excessive current
High side LED circuit
200mA
Environmental Specifications
CHARACTERISTIC
PARAMETER
NOTES
-40° to +85°C
-40° to +185°F
Operating Temperature Range
10A at 85°C
Per IEC 529
Ingress Protection
Humidity
IP67
0 to 90%RH
10-500Hz
Vibration
Per SAE J1455
Per SAE J1455
Per SAE J1455
Per SAE J1455
Per SAE J1455
Shock
Thermal Shock
Inductive Transient
Load Dump
+/- 600V
+150V
Installation Configuration
Visit Littelfuse.com for the most up-to-date product information. Littelfuse products are designed for specific applications and should not be used for any purpose (including, without limitation, automotive
applications) not expressly set forth in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in
applicable Littelfuse product documentation. Littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable
Littelfuse product documentation.
2 of 4
littelfuse.com
© 2017 Littelfuse Commercial Vehicle Products
Rev: 053117