MODEL: 40DR
Digital Panel Meters 40 Series
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
Moving parts and indicators are not coated.
/C01: Silicone coating
RTD INPUT DIGITAL PANEL METER
(4 digits, process meter)
/C02: Polyurethane coating
Functions & Features
/C03: Rubber coating
• 4 digit (±9999) panel meter
• HOLD functions
EX-FACTORY SETTING
/SET: Preset according to the Ordering Information Sheet
(No. ESU-9533)
• High visible, 0.8" (20.3mm) high and bright LED
96 (3.78)
GENERAL SPECIFICATIONS
Construction: Panel flush mounting
48
(1.89)
Connection: M3 screw terminals (torque 0.6 N·m)
Solderless terminal: Refer to the drawing at the end of the
section.
96 (3.78)
Recommended manufacturer: Japan Solderless Terminal
MFG.Co.Ltd, Nichifu Co.,ltd
mm (inch)
Applicable wire size: 0.25 to 1.65 mm
2
(AWG 22 to 16)
Screw terminal: Nickel-plated steel
MODEL: 40DR–R1–[1][2]
Housing material: Flame-resistant resin (gray)
Isolation: Input to power
A/D conversion: Σ – Δ
ORDERING INFORMATION
• Code number: 40DR–R1–[1][2]
Specify a code from below for each of [1] and [2].
(e.g. 40DR-R1-R/Q)
Sampling rate: 10 times/sec. (100 msec.)
Averaging: None or moving average
Setting: (Front button)
• Specify the specification for option code /Q
(e.g. /C01/SET)
• Temperature unit
• Moving average
• Brightness
• Others
INPUT
■Recommended solderless terminal
R1: Pt 100 (JIS'97, IEC)
3.3 (.13) max
(Usable range -200 to +850°C, -328 to +1562°F)
Pt 100 (JIS'89)
(Usable range -200 to +650°C, -328 to +1202°F)
mm (inch)
[1] POWER INPUT
AC Power
K3: 100 – 120V AC
DISPLAY
(Operational voltage range 85 - 132 V, 47 - 66 Hz)
L3: 200 – 240V AC
Display: 4 digits of 20.3 mm (0.8 inch) height, 7-segment,
red LED
(Operational voltage range 170 - 264 V, 47 - 66 Hz)
DC Power
Display range: -9999 to 9999
Decimal point position: 10–1 or none
Zero indication: Higher-digit zeros are suppressed.
Over-range indication:
R: 24 V DC
(Operational voltage range 24 V ±20 %, ripple 10 %p-p max.)
'S.ERR' blinks surpassing the permissible range.
'B.ERR' blinks at burnout.
[2] OPTIONS
Engineering unit indication: Sticker label attached
DC, AC, mV, V, kV, μA, mA, A, kA, mW, W,
kW, var, kvar, Mvar, VA, Hz, Ω, kΩ, MΩ,
cm, mm, m, m/sec, mm/min, cm/min, m/min,
blank: none
/Q: With options (specify the specification)
m/h, m/s
2
, inch, ℓ, ℓ/s, ℓ/min, ℓ/h, m
3
, m /sec,
3
m3/min, m3/h, Nm3/h, N·m, N/m2, g, kg, kg/h,
40DR SPECIFICATIONS
ES-9533 Rev.10 Page 1/6
https://www.m-system.co.jp/