4.8DBTW_3 series
4.8W - Dual Output - Wide Input - Isolated & Regulated regulated
IGBT dedicated DC-DC converter
Typical application
All the IGBT driver of this series are tested according to the recommended circuit (see Fig. 2) before delivery.
If it is required to further reduce input and output ripple, properly increase the input & output of additional capacitors Cin and Cout or
select capacitors of low equivalent impedance provided that the capacitance is no larger than the max. capacitive load of the product.
Vin
Cin
12V/24V
100μF
100μF
Cout
Application circuit
C1
100uF/63V(Electrolytic capacitor)
100uF/35V(Electrolytic capacitor)
10uF/25V(Ceramic capacitor)
C2 /C4
C3/C5
Application Notes
1. The wire between the converter and IGBT driver must as short as possible.
2. External filter capacitors should be connected as close as possible to the
IGBT driver.
3. To ensure the high peak gate current, the filter capacitors should be
electrolytic capacitor and ceramic capacitor collocation.
4. The output average power of the IGBT driver should be less than the output
power of DC-DC module.
EMC solution-recommended
4.8DBTSW_121509_D3P
4.8DBTW_241509_D3P
Fig-4
Parameters
4.8DBTSW_121509_D3P
Choose according to actual input current
4.8DBTW_241509_D3P
FUSE
MOV
C0
Choose according to actual input current
S14K25
680μF/25V
S14K35
330μF/50V
C1,C2
C3,C4
LCM
4.7μF/50V
4.7μF/50V
Refer to the Cout in Fig.2
1mH
Refer to the Cout in Fig.2
3.3mH
Module
FT-AX1D
Page 3 of 4
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com
4.8DBTW_3 – Rev. 2020-1.0
Specifications subject to change without notice.