2S7BE_6U Series
2W - Single/Dual Output DC-DC Converter - Fixed Input - Isolated & Unregulated
DC-DC Converter
2 Watt
The 2S7BE_6U series meet reinforced insulation requirements. They are specially
designed for applications where require compact size, high isolation, low isolation
capacitor and low leakage current power. They are widely used in electricity, IGBT
drivers and so on.
High efficiency up to 86%
6000VDC isolation
SIP package
Operating temperature:
-40°C to +85°C
International standard pinout
EMI complies with EN55032
Class B
Low ripple and noise
These products apply to:
1) Where the voltage of the input power supply is fixed (voltage variation ≤ 10%)
2) Where isolation is necessary between input and output
(isolation voltage 6000VDC)
3) Where do not has high requirement of line regulation and the ripple & noise of
the output voltage;
Such as: Collection and isolation, High voltage collection circuit, IGBT-driven cir-
cuits, etc.
(pending)
Common specifications
Short circuit protection:
Cooling:
Output specifications
1 sec. MAX
Item
Test condition
Min Typ
Max
3
Units
%
Nature convection
-40°C – +85°C
Output voltage
accuracy
Operation temperature range:
Storage temperature range:
Case temperature:
Lead temperature:
Storage humidity range:
MTBF (MIL-HDBK-217F@25°C):
Safety standard:
Line regulation
Load regulation
For Vin change of 1%
1.2
%
-40°C – +125°C
20% to 100% load
• 3.3V output
• Others
100°C MAX
20
10
%
%
260°C MAX, 1.5mm from case for 10 sec
< 95%
Temperature
coefficient
100% full load
0.02
%/°C
>1,121 Mhours
Ripple & Noise
20MHz Bandwidth
75
mVp-p
KHz
designed to meet IEC 60950-1
Plastic [UL94-V0]
2.3g
Switching frequency Full load, nominal input
80
Case material:
Weight:
EMC specifications
Dimensions:
19.3x6.1x9.9mm
EMI
CE*
EN55032
CLASS B
CLASS B
EMI
RE
EN55032
Input specifications
EMS
EMS
EMS
EMS
EMS
EMS
ESD
RS
IEC/EN61000-4-2
IEC/EN61000-4-3
IEC/EN61000-4-4
IEC/EN61000-4-5
IEC/EN61000-4-6
IEC/EN61000-4-8
perf. Criteria A
perf. Criteria A
perf. Criteria A
perf. Criteria A
perf. Criteria A
perf. Criteria A
Item
Test condition
Min
Typ
Max Units
Input voltage range
10
%
EFT**
Surge**
CS
Input surge voltage
(1sec. max.)
• 3.3V input
6
7
VDC
VDC
VDC
VDC
VDC
VDC
• 5VDC input
• 12VDC input
• 15VDC input
• 24VDC input
• 48VDC input
15
18
28
54
PFMF
*
Input filter components are required to help meet conducted emissions Class B,
also see section EMI filter on page 4.
** An external filter capacitor is required if the module has to meet IEC61000-4-4/
IEC61000-4-5, also see section EFT/Surge filter on page 4.
Reflected Ripple
Current*
20
mApk-pk
Input filter
Capacitor
* Reflected ripple current measured with a simulated source inductance of 12µH
and a source capacitor Cin(47µF, ESR<1.0Ω at 100KHz).
Isolation specifications
Example:
2S7BE_0505D6U
Item
Test condition
Min
Typ
60
Max
Units
VDC
MΩ
2= 2Watt; S7= SIP7; B= Pinning; E= Cost effective; 5Vin; 5Vout;
D= Dual Output; 6= 6kVDC; U= Unregulated Output
Isolation voltage
Isolation resistance
Isolation capacitance
Tested for 1 minute
Test at 500VDC
6000
1000
pF
Page 1 of 5
2S7BE_6U – Rev. 2018-1.0
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com