https://www.phoenixcontact.com/us/products/2987309
Relay Module - PLC-2RSC-24DC/ 1 - 2987309
Technical data
Ambient conditions
Ambient temperature (operation)
-20 °C ... 60 °C
-20 °C ... 60 °C
Ambient temperature (storage/transport)
Coil side
Nominal input voltage UN
Typical input current at UN
Typical response time
Typical release time
24 V DC
7 mA
4 ms
6 ms
Operating voltage display
Protective circuit
Yellow LED
Protection against polarity reversal Polarity protection diode
Free-wheeling diode Damping diode
Contact side
Contact type
2 N/O contacts (2 relays with 1 N/O contact)
AgNi
Contact material
Maximum switching voltage
Minimum switching voltage
Min. switching current
250 V AC/DC
24 V AC/DC
5 mA
Limiting continuous current
Interrupting rating (ohmic load) max.
3.5 A
84 W (at 24 V DC)
24 W (at 48 V DC)
24 W (at 60 V DC)
31 W (at 110 V DC)
46 W (at 220 V DC)
875 VA (for 250 V AC)
General
Test voltage relay winding/relay contact
Test voltage relay contact/relay contact
Operating mode
3 kV AC (50 Hz, 1 min.)
3 kV AC (50 Hz, 1 min.)
100% operating factor
2 x 107 cycles
Mechanical service life
Inflammability class according to UL 94
Designation
V0
Air and creepage distances between the power circuits
Standards/regulations
IEC 60664
EN 50178
IEC 62103
6 kV, safe isolation between input and output.
4 kV, basic insulation between the outputs.
Rated surge voltage / insulation
Rated insulation voltage
250 V AC
10/23/2014 Page 2 / 4