/ // /
4
275-JS6ꢂꢀ3
WEIGHTS AND DIMENSIONS
Drawing above for illustration purposes only, based on standard open power 480 volt generator. Lengths may vary with other voltages. Do not use for installation design.
Systeꢈ
OPU
EPU
ꢂiꢈensiꢃns (LxWxH)
125 x 62 x 70 in (3,180 x 1,570 x 1,780 mm)
125 x 62 x 92.4 in (3,180 x 1,570 x 2,350 mm)
Heiꢄht w/ꢀank 24hꢅ.
106 in (2,690 mm)
128.4 in (3,260 mm)
Weiꢄht (less tank)
5,676 lb (2,575 kg)
6,811 lb (3,089 kg)
Weights and dimensions are based on open power units and are estimates only. Consult the factory for accurate weights and dimensions for your specific generator set.
soUnD Data
unit ꢀyꢇe
Standby Fꢆll Lꢃad
Standby ꢁꢃ Lꢃad
OPU w/Critical Grade Muffler (dBA)
Sound Attenuated Enclosure (dBA)
Measurements for sound data are taken at 23 ft (7 m).
94.5
86.5
87
79
emissions Data
RATING DEFINITIONS AND CONDITIONS
//
ꢁox + ꢁmHC
Co
pm
Ambient capability factor at 984 ft (300 m). Consult your
2.76
0.43
0.064
local MTU Onsite Energy Power Generation Distributor for
other altitudes.
Standby ratings apply to installations served by a reliable
utility source. The standby rating is applicable to varying
loads for the duration of a power outage. No overload capa-
bility for this rating. Ratings are in accordance with
ISO-3046/1, BS 5514, AS 2789, and DIN 6271.
Deration Factor:
Altitꢆde: 5% per 1,000 ft (305 m) above 8,900 ft (2,700 m).
ꢀeꢈꢇeꢅatꢆꢅe: 0.5% per 10°F (5.5°C) above 77°F (25°C).
//
All ꢆnits aꢅe in ꢄ/hꢇ-hꢅ and aꢅe EpA ꢂ2 cycle valꢆes.
Emission levels of the engine may vary as a function of ambi-
ent temperature, barometric pressure, humidity, fuel type and
quality, installation parameters, measuring instrumentation,
etc. The data provided are laboratory results from one engine
representing this rating. The data was obtained under cont-
rolled environmental conditions with calibrated instrumentation
traceable to the United States National Bureau of Standards
and in compliance with US EPA regulations found within 40 CFR
Part 89. The weighted cycle value from each engine is guaran-
teed to be below the US EPA Standards at the US EPA defined
conditions.
//
Materials and specifications subject to change without notice.
// ꢀꢃꢄnꢆꢈ gꢅꢃꢆꢇ Cꢃꢈꢇanies: Eꢆꢅꢃꢇe / middle East / Afꢅica / Latin Aꢈeꢅica / MTU Onsite Energy / 88040 Friedrichshafen / Germany / Phone + 49 7541 90 7060 /
Fax +49 7541 90 7084 / powergenregion1@mtu-online.com // Asia / Australia / Pacific / MTU Onsite Energy / 1, Benoi Place / Singapore 629923 / Republic of Singapore /
Phone + 65 6861 5922 / Fax + 65 6861 3615 / powergenregion2@mtu-online.com // uSA / Canada / mexicꢃ / MTU Onsite Energy / 100 Power Drive / Mankato, Minnesota
56001 / USA / Phone + 1 507 625 7973 / Fax + 1 507 625 2968 / powergenregion3@mtu-online.com // Wꢃꢅldwide fꢃꢅ Hꢃtmꢃdꢆle / MTU Onsite Energy / 81663 Munich /
Germany / Phone + 49 89 203042 800 / Fax +49 89 203042 900 / info@mtu-online.com // www.mtu-online.com
5秒后页面跳转
PCF8574资料解读：主要参数分析、引脚说明
AD637数据手册解读：主要特性、引脚及其功能解读、电气参数
ADUM1201资料手册解读：参数分析、引脚说明、应用分析
一文带你了解压敏电阻器在直流电路中的过压保护作用
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
