Datasheet > 2320-0SL

2320-0SL

更新时间： 2024-02-16 01:24:16

品牌	Logo	应用领域
约翰逊 - JOHANSON		电容器调节器
页数	文件大小	规格书
2页	146K
描述
Variable Capacitor, Ceramic, 250V, 0.6pF Min, 2.5pF Max, Vertical Adjuster, Surface Mount

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

2320-0SL 技术参数

是否Rohs认证：	不符合	生命周期：	Active
包装说明：	, 1817	Reach Compliance Code：	compliant
ECCN代码：	EAR99	HTS代码：	8532.30.00.10
风险等级：	5.86	调节器方向：	VERTICAL
最大电容：	2.5 pF	最小电容：	0.6 pF
电容器类型：	VARIABLE CAPACITOR	介电材料：	CERAMIC
高度：	2.337 mm	长度：	4.572 mm
安装特点：	SURFACE MOUNT	多匝：
最高工作温度：	125 °C	最低工作温度：	-55 °C
封装形式：	SMT	包装方法：	Bulk
额定（直流）电压（URdc）：	250 V	尺寸代码：	1817
表面贴装：	YES	端子形状：	FLAT
宽度：	4.242 mm	Base Number Matches：	1

2320-0SL 数据手册

Cera-Trim Handling Instruction

Click to Go Back

Storage

Cera-Trim capacitor packed in desiccant and should remain in their original packing as long as possible

before soldering. If they have been inadvertently left unprotected, they may be dried by placing Cera-Trim

in an oven at 50° to 85°C (122-185°F) for 1 to 2 hours depending on particular oven type.

Soldering

The use of 60-40 solder (SN60-63) is recommended. The use of higher temperature solder is not

recommended.

Hand Soldering: Use a temperature controlled 40 watt iron set @ 500°F maximum. The solder joint

should be made in 3 seconds or less.

Wave Soldering: Recommended preheat is 1 to 2 minutes. Soldering temperature, 220°C for 5 seconds

maximum.

Reflow Soldering: Recommended preheat is 1 to 2 minutes. Soldering temperature, 240°C for 20 seconds

maximum.

Cleaning

Cera-Trim capacitors are compatible with a wide variety of cleaning processes including those that utilize

aqueous or semi-aqueous cleaning solutions, alcohol solutions, de-ionized water and numerous other

cleaners. However, due to the large variety of such processes, the customer through cleaning process

evaluation in conjunction with Johanson product purchased must determine actual compatibility. Cera-

Trim capacitor with process seal over the tuning access hole can be cleaned in very aggressive systems. It

is possible to clean these sealed trimmers by suspension in vapor or total immersion in liquid ultrasonic

systems containing the cleaning solutions listed above.

Adjusting

The process seal on the Cera-Trim capacitor must be penetrated by the appropriate Johanson tuning tool

after assembly. The penetration renders the seal no longer effective.

The tuning torque range is specified for each type of capacitor. The maximum specified value should not be

exceeded or damage to the capacitor may result.

Always use the recommended tuning tool. Johanson tuning tools are designed specifically for tuning

Johanson products; use of other tools, particularly metal screwdrivers, could damage the tuning mechanism

rendering the capacitor un-tunable.

Johanson Manufacturing Corp., 301 Rockaway Valley Road, Boonton, NJ 07005, Tel: 973-334-2676 Fax: 973-334-2954

下载PDF

与2320-0SL相关器件

型号	品牌	描述	获取价格	数据表
2320-0SLR1	JOHANSON	Variable Capacitor, Ceramic, 250V, 0.6pF Min, 2.5pF Max, Vertical Adjuster, Surface Mount	获取价格
2320-0SLR2	JOHANSON	Variable Capacitor, Ceramic, 250V, 0.6pF Min, 2.5pF Max, Vertical Adjuster, Surface Mount	获取价格
2320-1	JOHANSON	Variable Capacitor, Ceramic, 250V, 1pF Min, 5pF Max, Vertical Adjuster, Surface Mount	获取价格
23201.6	LITTELFUSE	Axial Lead and Cartridge Fuses - Designed to METI Standard	获取价格
23201.6XE	LITTELFUSE	Axial Lead and Cartridge Fuses - Designed to METI Standard	获取价格
23201.6XW	LITTELFUSE	Axial Lead and Cartridge Fuses - Designed to METI Standard	获取价格

与2320-0SL相关文章

SG3525资料手册详解：SG3525参数分析、引脚说明、应用介绍
2024-05-23

4
AT89C51单片机资料手册详细解析及应用示例
2024-05-23

6
CP2102资料手册解读：CP2102引脚说明、关键参数分析
2024-05-23

3
资料手册解读：UC3842参数和管脚说明
2024-05-22

5

产品中心

服务支持

精选活动

关于我们

帮助中心

2320-0SL

2320-0SL 技术参数

2320-0SL 数据手册

与2320-0SL相关器件

与2320-0SL相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

2320-0SL

2320-0SL 技术参数

2320-0SL 数据手册

与2320-0SL相关器件

与2320-0SL相关文章

您还可以找

您在本页遇到什么问题？