Datasheet > 2063069-1

2063069-1

更新时间： 2024-09-25 01:03:31

品牌	Logo	应用领域
泰科 - TE		/
页数	文件大小	规格书
4页	262K
描述
Reasons for reissue of this instruction sheet are provided in Section 8, REVISION SUMMARY.

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

2063069-1 数据手册

Instruction Sheet

RJ Point Five* Connector Seating

Tool Assemblies 2063000-[ ]

408-10221

12 OCT 15 Rev D

Back

Top

Seating Tool Bottomed

on Receptacle Connector

2 X 8 RJ Point Five

Receptacle Connector

2007669-1 (Shown)

Compliant

Pin Contact

Printed Circuit

(PC) Board (Ref)

PC Board Support

Fixture (Ref)

SEATING TOOL

RJ POINT FIVE

CONFIGURATION

ASSEMBLY

2063000-1

2063000-2

2 X 8

2 X 12

Figure 1

1. INTRODUCTION

RJ Point Five Connector Seating Tool Assemblies 2063000-1 and -2, shown in Figure 1, are used to seat 2 X 8

and 2 X 12 (respectively) receptacle connectors onto the pc board. The receptacle connector contains

compliant pin contacts to allow solderless pc board installation. Read these instructions thoroughly before using

the seating tool.

NOTE

Dimensions on this sheet are in metric units [with U.S. customary units in brackets]. Figures are not drawn to scale.

Reasons for reissue of this instruction sheet are provided in Section 8, REVISION SUMMARY.

2. DESCRIPTION (See Figure 1)

The seating tool consists of two sides, a back, and a top. It has cutouts (two located on each side and two

located on the back) to accept the protruding part of the standoffs of the receptacle connector.

The top of the seating tool provides a surface to accept the force applied by the application tool to seat the

receptacle connector onto the pc board. The seating tool is designed to position behind the panel ground

springs of the receptacle connector. During seating, the back and sides of the seating tool protect the

receptacle connector from damage.

3. REQUIREMENTS

3.1. PC Board Support Fixture (Customer Supplied)

A pc board support must be used to provide proper support for the pc board and to protect the pc board and

receptacle connector from damage. The support fixture must be designed for specific needs using the following

recommendations:

 it should be at least 25.4 mm [1 in.] longer and wider than the pc board

 it should have flat surfaces with holes or a channel large enough and deep enough to receive any

protruding components of the receptacle connector

This controlled document is subject to change.

For latest revision and Regional Customer Service,

visit our website at www.te.com.

*Trademark

PRODUCT INFORMATION 1-800-522-6752

1 of 4

TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.

12 3 4

中文翻译

下载PDF

与2063069-1相关器件

型号	品牌	获取价格	描述	数据表
2063070-1	TE	获取价格	Reasons for reissue of this instruction sheet are provided in Section 8, REVISION SUMMARY.
2063071-1	TE	获取价格	Reasons for reissue of this instruction sheet are provided in Section 8, REVISION SUMMARY.
206-311	CTS	获取价格	Through Hole DIP Switch
2063110ESTN	CTS	获取价格	Through Hole DIP Switch
2063110LPSTN	CTS	获取价格	Right Angle Panel DIP Switch
2063112ESTN	CTS	获取价格	Through Hole DIP Switch
2063112LPSTN	CTS	获取价格	Right Angle Panel DIP Switch
206311ESTN	CTS	获取价格	Through Hole DIP Switch
206311LPSTN	CTS	获取价格	Right Angle Panel DIP Switch
206-311ST	CTS	获取价格	Multifunctional through hole DIP switches

与2063069-1相关文章

SK海力士量产12层HBM3E，容量高达36GB
2024-09-27

7
意法半导体传感器驱动Sphere，开启沉浸式电影新时代
2024-09-27

12
摩尔斯微电子在美国约书亚树国家公园测试 Wi-Fi HaLow
2024-09-18

80
贸泽上架Tallysman TW5386智能GNSS天线
2024-09-18

71

产品中心

服务支持

精选活动

关于我们

帮助中心

2063069-1

2063069-1 数据手册

与2063069-1相关器件

与2063069-1相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

2063069-1

2063069-1 数据手册

与2063069-1相关器件

与2063069-1相关文章

您还可以找

您在本页遇到什么问题？