Instruction Sheet
Crimping Dies for
TERMINYL* and PLASTI-GRIP*
Terminals and Splices
408-10051
23 MAR 11 Rev C
PROPER USE GUIDELINES
Cumulative Trauma Disorders can resultfrom the prolonged use ofmanually powered hand tools. Hand tools are intended for occasional use and low volume
applications. A wide selection of powered application equipment for extended-use, production operations is available.
Typical
Crimping
Dies
Moving
Die (Nest)
Yoke Set Screw
Moving
Die (Nest)
Locking
Flange
Locator
Latch Arm
Locator
Stationary
Die (Anvil)
Stationary
Die (Anvil)
Yoke
Adapter
Shank
CRIMPING DIE
WIRE SIZE (AWG)
PART NUMBER
1901006--1
COLOR CODE DOT
Red
Blue
8
6
1901007--1
Figure 1
1. INTRODUCTION
2. DESCRIPTION
Each crimping die consists of a stationary die (nest)
and a moving die (anvil). The stationary die features a
locator. Each die contains a color code dot that
matches the color code of the terminal and splice.
When mated, the dies form a crimping chamber.
Crimping Dies 1901006--1 and 1901007--1 are used
with Battery Powered Hand Tool 1901343--1, --2, --3,
and --4 (Customer Manual 409--10070) and Battery
Powered Hand Tool 2031404--1, --11, --21, --31, and
--41 (Customer Manual 409--10103). The dies crimp
TERMINYL Terminals and Splices onto wire sizes 8
through 6 AWG, TERMINYL Splices with step--down
adapters onto wire sizes 16--14 through 6 AWG, and
PLASTI--GRIP Terminals and Splices onto wire sizes
8 through 6 AWG. Refer to Figure 1 to ensure
compatibility of crimping die part number, color code
dot, and wire size.
3. DIE INSTALLATION AND REMOVAL
3.1. Die Installation
1. Pivot the latch arm away from the yoke to open
the crimp head. See Figure 1.
2. Loosen the set screw in the yoke.
3. Insert the shank of the stationary die into the
yoke, and tighten the set screw.
Dimensions in this document are in millimeters
[with inches in brackets]. Figures and Illustrations
are for reference only and are not drawn to scale.
NOTE
4. Extend the ram until the ram set screw is visible.
E2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company TOOLING ASSISTANCE CENTER 1--800--722--1111 This controlled document is subject to change.
1 of 7
All Rights Reserved
PRODUCT INFORMATION 1--800--522--6752
For latest revision and Regional Customer Service,
TE logo is a trademark.
visit our website at www.te.com
LOC B
*Trademark. Other product names, logos, or company names might be trademarks of their respective owners.