1782 DWDM High Power CW Source Laser
DATASHEET | DECEMBER 2012
FIBER OPTICS
Laser Safety
This product complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June
24, 2007.
All Versions of this laser are Class 1M laser product, tested according to IEC 60825-1:2007/EN 60825-1:2007
Single-mode fiber pigtail with FC/APC connectors (standard).
Wavelength = 1.5 m.
Maximum power = 100 mW.
Because of size constraints, laser safety labeling (including an FDA class 1M label) is not affixed to the module, but
attached to the outside of the shipping carton.
Product is not shipped with power supply.
Caution: Use of controls, adjustments and procedures other than those specified herein may result in hazardous
laser radiation exposure.
DANGER
INVISIBLE LASER RADIATION
DANGER
IS EMITTED FROM THE END
OF FIBER OR CONNECTOR
INVISIBLE LASER
Avoid direct exposure to beam
RADIATION
AVOID DIRECT EXPOSURE TO BEAM
Do not view beam directly with
optical instruments
Wavelength: 1.5
m
Max. Output: 100mW,
Class 1M Laser Product
INVISIBLE LASER RADIATION EMITTED FROM END OF FIBER OR CONNECTOR
m
Class 1M Laser Product IEC-60825-1:20007 Max.Output:100mW
Wavelength: 1.5
|
REV 2012.12
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.