1754C C-Band DWDM DFB Laser Module
DATASHEET | DECEMBER 2013
FIBER OPTICS
The 1754C laser module is a Dense Wavelength Division Multiplexing (DWDM) laser for analog CATV
applications. It features a distributed-feedback (DFB) device that has been designed specifically for
radio frequency (RF) and CATV applications. The 1754C laser module has a wide temperature range
for reliable performance in harsh node environments and narrow transmitter designs. It also features
low adiabatic chirp to maximize signal quality in short and long lengths of fiber. The laser’s excellent
inherent linearity minimizes degradation of the broadcast signals caused by quadrature amplitude
modulated (QAM) channels.
The 1754C is available in all C-band ITU grid wavelengths.
Applications
CATV Broadcast Networks
Networks with Limited Fiber
Performance Highlights
Min
Typical
Max
Units
nm
Architectures Using Separate Optical
Wavelengths to Carry Targeted Services
Available Wavelengths
See page 3
Operating Temperature Range
Optical Output Power
-40
25
-
+85
-
C
6 - 16
mW
MHz/mA
dBc
Features
Adiabatic Chirp (measured at 500 MHz)
Composite Second-Order Distortion (CSO)
Composite Triple Beat Distortion (CTB)
Carrier-to-Noise Ratio (CNR)
Frequency Range
40
-
-
100
-55
-64
-
Standard ITU Grid Wavelengths
Advanced Analog Chip Design
-
-
-
dBc
Reduced Equipment Requirements in
the Hub
52
5
-
dB
-
2700
-
MHz
dB
OC-48 Pin Out
RF Return Loss
16
-
Telcordia Technologies™ 468 Compliant
Noise and distortion performance above assume 79 channel NTSC loading with no QAM, 0 dBm
received optical power. See following pages for complete specifications and operating/test conditions.
Wide Temperature Range – Stable Even
in Harsh Environments
RoHS Compliant
|
REV 2013.12
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.