Agilent 16910A and 16911A Specifications and Characteristics
State (Synchronous) Analysis Mode
tWidth* [1]
Option 250
1.5 ns
Option 500
1.5 ns
tSetup
0.5 tWidth
0.5 tWidth
–3.2 ns to ꢀ3.2 ns
80 ps typical
250 Mb/s
0.5 tWidth
0.5 tWidth
–3.2 ns to ꢀ3.2 ns
80 ps typical
500 Mb/s
tHold
tSample range [2]
tSample adjustment resolution
Maximum state data rate on each channel
Maximum channels on a single time base
and trigger [4]
16910A: 510 – (number of clocks)
16911A: 340 – (number of clocks)
16910A: 510 – (number of clocks)
16911A: 340 – (number of clocks)
Memory depth [4]
(Option 256 is included in base price)
Option 256: 256 K samples
Option 001: 1 M samples
Option 004: 4 M samples
Option 016: 16 M samples
Option 032: 32 M samples
Option 256: 256 K samples
Option 001: 1 M samples
Option 004: 4 M samples
Option 016: 16 M samples
Option 032: 32 M samples
Number of independent analyzers [5]
Number of clocks [6]
2
1
4
1
Number of clock qualifiers [6]
4
N/A
2.0 ns
Minimum time between active
clock edges* [7]
4.0 ns
Minimum master to slave clock time
Minimum slave to master clock time
Minimum slave to slave clock time
1 ns
N/A
N/A
N/A
1 ns
4.0 ns
*
Items marked with an asterisk (*) are specifications. All others are characteristics.
“Typical” represents the average or median value of the parameter based on measurements from a significant number of units.
[1] Minimum eye width in system under test.
[2] Sample positions are independently adjustable for each data channel input. A negative sample position causes the input to be synchronously sampled by that amount before
each active clock edge. A positive sample position causes the input to be synchronously sampled by that amount after each active clock edge. A sampling position of zero
causes the input to be synchronously sampled coincident with each clock edge.
[3] Use of eye finder is recommended in 450 MHz and 500 Mb/s state mode.
[4] In 250 Mb/s state mode, with all pods assigned, memory depth is half the maximum memory depth. With one pod pair (34 channels) unassigned, the memory depth is full. One
pod pair (34 channels) must remain unassigned for time tags in 500 Mb/s state mode.
[5] Independent analyzers may be either state or timing. When the 500 Mb/s state mode is selected, only one analyzer may be used.
[6] In the 250 Mb/s state mode, the total number of clocks and qualifiers is 4. All clock and qualifier inputs must be on the master modules.
[7] Tested with input signal Vh = ꢀ1.3 V, Vl = ꢀ0.7 V, threshold = ꢀ1.0 V, tr/tf = 180 ps 30 ps (10ꢁ, 90ꢁ).
tWidth
Individual
Data Channel
vHeight
Data Eye
vThreshold
OV
tSetup tHold
Sampling Position
Clock Channel
tSample
8
5秒后页面跳转
SG3525资料手册详解：SG3525参数分析、引脚说明、应用介绍
AT89C51单片机资料手册详细解析及应用示例
CP2102资料手册解读：CP2102引脚说明、关键参数分析
资料手册解读：UC3842参数和管脚说明
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
