150D
Vishay Sprague
®
Solid-Electrolyte TANTALEX Capacitors
Hermetically-Sealed, Axial-Lead
STANDARD REEL PACKAGING SPECIFICATIONS - MEETS EIA STANDARD RS-296 in inches [millimeters]
13.0 [330.2]
“A”
STANDARD REEL
TAPE SPACING
B
1.12ꢀ to 3.07
[28.ꢀ to 78.0]
COMPONENT
SPACING
A
I.D. REEL HUB
1.374 to 3.ꢀ2ꢀ
[34.9 to 92.1]
0.031 [0.79] MAX.
OFF CENTER (1.a)
0.ꢀ25 0.00ꢀ2 DIA.
[15.88 1.575]
0.125 [3.18] MAX.
0.250 [ꢀ.35] (3.b)
THRU HOLE
0.750 [19.05]
SECTION “A” - “A”
0.031 [0.79] (3.f)
BOTH SIDES (3.f)
“A”
LABEL (4.a)
TYPE 150D UNITS WITH
INSULATING SLEEVE
COMPONENT
LEAD SIZE
TAPE SPACING
B
CASE
CODE
UNITS
PER REEL
SPACING
D
L
AWG NO.
NOM. DIA.
A
0.135 0.016
[3.43 0.41]
0.185 0.016
[4.70 0.41]
0.289 0.016
[7.34 0.41]
0.351 0.016
[8.92 0.41]
0.286 0.031
[7.26 0.79]
0.474 0.031
[12.04 0.79]
0.686 0.031
[17.42 0.79]
0.786 0.031
[19.96 0.79]
0.020
[0.51]
0.020
[0.51]
0.025
[0.64]
0.025
[0.64]
0.200 0.015
[5.08 0.38]
0.200 0.015
[5.08 0.38]
0.400 0.015
[10.16 0.38]
0.400 0.015
[10.16 0.38]
2.500 0.062
[63.5 1.57]
2.500 0.062
[63.5 1.57]
2.875 0.062
[73.03 1.57]
2.875 0.062
[73.03 1.57]
A
B
R
S
24
1000
1000
500
24
22
22
500
STANDARD REEL PACKAGING INFORMATION
1. Component Leads:
f. A row of components must be centered between tapes
0.047" [1.19 mm]. In addition, individual components
a. Component leads shall not be bent beyond 0.047"
[1.19 mm] maximum from their nominal position when
measured from the leading edge of the component lead
at the inside tape edge and at the lead egress from the
component.
b. The “C” dimension shall be governed by the overall
length of the reel packaged component. The distance
between flanges shall be 0.125" to 0.250" [3.18 mm to
6.35 mm] greater than the overall component length.
may deviate from center of component row
[0.79 mm].
0.031"
g. Staples shall not be used for splicing. Not more than
4 layers of tape shall be used in any splice area and no
tape shall be offset from another by more than 0.031"
[0.79 mm] non-cumulative. Tape splices shall overlap at
least 6.0" [152.4 mm] for butt joints and at least 3.0"
[76.2 mm] for lap joints and shall not be weaker than
unspliced tape. Universal splicing clips may also be used.
2. Orientation:
h. Quantity per reel shall be controlled so that tape
components and cover shall not extend beyond the
smallest dimension of the flange (either across flats or
diameter). Once the quantity per reel for each part
number has been established, future orders for that part
number shall be packaged in that quantity. When order or
release quantity is less than the established quantity, a
standard commercial pack is to be used.
All polarized components must be oriented to one
direction. The cathode lead tape shall be a color and the
anode lead tape shall be white.
3. Reeling:
a. Components on any reel shall not represent more than
two date codes when date code identification is required.
b. Component leads shall be positioned between pairs of
0.250" [6.35 mm] tape.
c. The disposable reels have hubs and corrugated fiber
board flanges and core or equivalent.
i. A maximum of 0.25 % of the components per reel
quantity may be missing without consecutive missing
components.
d. A minimum of 12.0" [304.8 mm] leader of tape shall be
provided before the first and after the last component on
the reel.
j. Adequate protection must be provided to prevent
physical damage to both reel and components during
shipment and storage.
e. 50 or 60 lb.Kraft paper must be wound between layer of
components as far as necessary for component
protection. Width of paper to be 0.062" to 0.250"
[1.57 mm to 6.35 mm] less than the “C” dimension
4. Marking:
Minimum reel and carton marking shall consist of the
following: Customer Part Number, Purchase Order No.,
Quantity, Package Date, Manufacturer's Name, Electrical
Value, Date Code, Vishay Sprague Part Number and
Country of Origin.
®
of the reel. Solid-Electrolyte TANTALEX Capacitors
Hermetically- Sealed, Axial-Lead.
www.vishay.com
26
For technical questions, contact: tantalum@vishay.com
Document Number: 40015
Revision: 16-Jan-08
5秒后页面跳转
SG3525资料手册详解：SG3525参数分析、引脚说明、应用介绍
AT89C51单片机资料手册详细解析及应用示例
CP2102资料手册解读：CP2102引脚说明、关键参数分析
资料手册解读：UC3842参数和管脚说明
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
