TYPE 150D
STANDARD REEL PACKAGING SPECIFICATIONS - Meets EIA Standard RS-296
[Numbers in brackets indicate millimeters]
Component Overall
Length (1.b)
13.0 [330.2]
"A"
Standard Reel
C (1.b)
Tape Spacing
1.126 to 3.07
[28.6 to 78.0]
I.D. Reel Hub
B
Component
Spacing
(1.a)
A
1.374 to 3.626
[34.9 to 92.1]
0.031 [0.79] Max.
Off Center (1.a)
0.625 ± 0.062 Dia.
[15.88 ± 1.575]
Thru Hole
0.125 [3.18] Max.
0.250 [6.35] (3.b)
0.750 [19.05]
SECTION "A" - "A"
Label (4.a)
"A"
0.031 [0.79] (3.f)
Both Sides (3.f)
TYPE 150D UNITS WITH
INSULATING SLEEVE
COMPONENT
SPACING
TAPE
SPACING
LEAD SIZE
QUANTITY/REEL*
CASE
CODE
D
L
AWG NO.
NOM. DIA.
A
B
(Min.)
(Max.)
A
B
R
S
0.135 ± 0.016
[3.43 ± 0.41]
0.286 ± 0.031
[7.26 ± 0.79]
24
24
22
22
0.020
[0.51]
.200 ± 0.015
[5.08 ± 0.38]
2.500 ± 0.062
[63.5 ± 1.57]
1000
3000
0.185 ± 0.016
[4.70 ± 0.41]
0.474 ± 0.031
[12.04 ± 0.79]
0.020
[0.51]
.200 ± 0.015
[5.08 ± 0.38]
2.500 ± 0.062
[63.5 ± 1.57]
1000
500
3000
900
0.289 ± 0.016
[7.34 ± 0.41]
0.686 ± 0.031
[17.42 ± 0.79]
0.025
[0.64]
.400 ± 0.015
[10.16 ± 0.38]
2.875 ± 0.062
[73.03 ± 1.57]
0.351 ± 0.016
[8.92 ± 0.41]
0.786 ± 0.031
[19.96 ± 0.79]
0.025
[0.64]
.400 ± 0.015
[10.16 ± 0.38]
2.875 ± 0.062
[73.03 ± 1.57]
500
700
*For quantities greater than the maximum shown for each case code, the maximum quantity will be used on as many reels as possible, with
*the last reel quantity being variable, i.e. an order for 10,000 Type 150D capacitors in Case Code A will consist of 2 reels with 4000 units and
*1 reel with 2000 units.
f. A row of components must be centered between
tapes ± 0.047" [1.19mm]. In addition, individual
components may deviate from center of component
row ± 0.031" [0.79mm].
g. Staples shall not be used for splicing. Not more than
4 layers of tape shall be used in any splice area and
no tape shall be offset from another by more than
0.031" [0.79mm] non-cumulative. Tape splices shall
overlap at least 6.0" [152.4mm] for butt joints and at
least 3.0" [76.2mm] for lap joints and shall not be
weaker than unspliced tape. Universal splicing clips
may also be used.
STANDARD REEL PACKAGING INFORMATION
1. Component Leads:
a. Component leads shall not be bent beyond 0.047"
[1.19mm] maximum from their nominal position when
measured from the leading edge of the component
lead at the inside tape edge and at the lead egress
from the component.
b. The 'C' dimension shall be governed by the overall
length of the reel packaged component. The
distance between flanges shall be 0.125" to 0.250"
[3.18mm to 6.35mm] greater than the overall
component length.
h. Quantity per reel shall be controlled so that tape
components and cover shall not extend beyond the
smallest dimension of the flange (either across flats
or diameter). Once the quantity per reel for each
part number has been established, future orders for
that part number shall be packaged in that quantity.
When order or release quantity is less than the
established quantity, a standard commercial pack is
to be used.
2. Orientation:
a. All polarized components must be oriented to one
direction. The cathode lead tape shall be a color and
the anode lead tape shall be white.
3. Reeling:
a. Components on any reel shall not represent more
than two date codes when date code identification is
required.
i. A maximum of 0.25% of the components per reel
quantity may be missing without consecutive
missing components.
j. Adequate protection must be provided to prevent
physical damage to both reel and components
during shipment and storage.
b. Component leads shall be positioned between pairs
of 0.250" [6.35mm] tape.
c. The disposable reels have hubs and corrugated
fiberboard flanges and core or equivalent.
d. A minimum of 12.0" [304.8mm] leader of tape shall be
provided before the first and after the last component
on the reel.
4. Marking:
a. Minimum reel and carton marking shall consist of the
following: Customer Part Number, Purchase Order
No., Quantity, Package Date, Manufacturer's Name,
Electrical Value, Date Code, Vishay Sprague Part
Number and Country of Origin.
e. 50 or 60 lb. Kraft paper must be wound between
layer of components as far as necessary for
component protection. Width of paper to be 0.062"
to 0.250" [1.57mm to 6.35mm] less than the 'C'
dimension of the reel.
Vishay Sprague 678 Main Street, Sanford, ME 04073 • Phone (207) 324-4140 • Fax 207-324-7223 • Internet www.vishay.com
102
Major Vishay Brands Dale • Draloric • Foil Resistors • Lite-On PSC • Measurements Group • Roederstein • Sfernice • Siliconix • Sprague • Telefunken • Thin Film • Vitramon
5秒后页面跳转
ADC0809逐次逼近寄存器型模数转换器：资料手册参数分析
AD9361捷变收发器：全面参数解析与关键特性概览
IRF3205功率MOSFET：资料手册参数分析
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
