150D
Vishay Sprague
www.vishay.com
®
Solid-Electrolyte TANTALEX Capacitors,
Hermetically-Sealed, Axial-Lead
FEATURES
• Terminations: Tin/lead (SnPb), 100 % tin
(RoHS compliant)
• These high performance, hermetically-sealed
®
TANTALEX capacitors have set the standard
for solid-electrolyte tantalum capacitors for
more than three decades
• High capacitance, low DCL, low dissipation factor and
exceptional operating stability
• Performance and reliability have been proven in
commercial, industrial and military applications
• Available in four case codes and capacitors and are
supplied with plastic-film insulation
• Terminals are solid, tinned nickel wire leads
• The military equivalent to the 150D is the M39003/01
(style CSR13) which is qualified to MIL-PRF-39003
• Compliant to RoHS Directive 2011/65/EU
Note
* Pb containing terminations are not RoHS compliant, exemptions
may apply
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 85 °C
Life Test: Capacitors shall withstand rated DC voltage
applied at + 85 °C for 2000 h or derated DC voltage applied
at + 125 °C for 1000 h
(to + 125 °C with voltage derating)
Capacitance Tolerance: At 120 Hz, + 25 °C
20 %, 10 % standard. 5 % available as special
Following the life test:
Dissipation Factor: At 120 Hz, + 25 °C
1. DCL shall not exceed 125 % of the initial requirement
2. Dissipation factor shall meet the initial requirement
3. Change in capacitance shall not exceed 5 %
DC Leakage Current (DCL Max.):
At + 25 °C: Leakage current shall not exceed the values
listed in the Standard Ratings table
At + 85 °C: Leakage current shall not exceed 10 times the
values listed in the Standard Ratings table
At + 125 °C: Leakage shall not exceed 15 times the values
listed in the Standard Ratings table
ORDERING INFORMATION
150D
224
X0
006
A
2
T
E3
MODEL
CAPACITANCE
CAPACITANCE DC VOLTAGE RATING
CASE
CODE
STYLE
NUMBER
PACKAGING
RoHS
COMPLIANT
TOLERANCE
AT 85 °C
This is expressed
in picofarads. The
first two digits are
the significant
figures. The third
is the number of
zeros to follow.
X0 = 20 %
X9 = 10 %
X5 = 5 % *
* Special order
This is expressed in
volts. To complete the
three-digit block,
zeros precede the
voltage rating.
See
Ratings
and Case
Codes
table
0 = No Sleeve
2 = Insulated
sleeve
B = Bulk
T = Tape
and reel
E3 = 100 % tin
termination
(RoHS compliant)
Blank = SnPb
termination
Revision: 01-Mar-12
Document Number: 40015
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000