Datasheet > 13POE_4812-13-B

13POE_4812-13-B

更新时间： 2024-02-03 10:35:13

品牌	Logo	应用领域
GAPTEC		/
页数	文件大小	规格书
2页	525K
描述
10W and 13W - Single Output - Wide Input - Isolated & Regulated

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

13POE_4812-13-B 数据手册

13POE_48-10-B Series

10W and 13W - Single Output - Wide Input - Isolated & Regulated

DC-DC Converter

10 and 13 Watt

Eﬃciency up to 84%

Meet CISPR22/EN55022

CLASS A

Six-sided metal shield

Industry standard pinout

The 13POE_48-10-B module is designed to extract power from a conventio-

nal twisted pair Category 5 Ethernet cable, conforming to the IEEE 802.3af

Power-over-Ethernet (PoE) standard.

Over load protection

Short circuit protection (SCP)

Operating temperature range:

-40°C ~ +85°C

The 13POE_48-10-B signature and control circuit provides the PoE compati-

bility signature and power classiﬁcation required by the Power Sourcing

Equipment (PSE) before applying up to 15W power to the port.

The 13POE_48-10-B is compatible with Class 0 to Class 3 equipment.

The high eﬃciency DC/DC converter operates over a wide input voltage

range and provides a regulated low ripple and low noise output. The DC/

DC converter also has built-in overload and short-circuit output protection.

Common speciﬁcations

Short circuit protection:

Cooling:

Output speciﬁcations

Continous, automatic recovery

Free air convection

-40°C~+85°C

Item

Test condition

Min

-2

Typ

Max

Units

%Vo

Voltage set point

Line regulation

Load regulation

Rated output current

Operation temperature range:

Storage temperature range:

Case/board temperature:

Lead temperature:

Vi =Vi,min to Vi,max

Io = Io,min to Io,max

0.5

-55°C~+125°C

-40~100°C MAX

13POE_4803

13POE_4805

13POE_4812

0.06

300°C MAX, 1.5mm from case for 10 sec

5% MIN, 95% MAX

0.02%/°C

1.1

Storage humidity range:

Temperature coeﬃcient:

Switching frequency:

Case material:

External load

capacitance

Min ESR>10mΩ

330

1000

150

µF

Output Ripple & Noise

Peak-to-peak:

5 Hz to 20 MHz

T_A= -40°C~85°C

260kHz TYP

Plastic (UL94-V0)

13g

Weight:

Start delay time

Turn-on time

Io = Io, max

Input speciﬁcations

Voltage overshoot

Io = Io, max;

TA= 25°C

%Vo

Item

Test condition

Min

Typ

Max

Units

Dynamic response

0.1A/uS

50%~75%~50%Inom

Vin=48V

135/

500

mV/

Operating input voltage

Maximum input current TA= 25°C

Maximum input voltage Continuous

0.45

VDC

Transient (100ms)

Protection speciﬁcations

Item

Test condition

Min

Typ

Max Units

Isolation speciﬁcations

Item

Input over voltage

lockout*

Test condition

Min

Typ

Max

500

Units

VDC

Isolation voltage

Input-output

1mA-1min

Input under voltage

lockout*

• Turn-on point

• Turn-oﬀ point

35.1

31.1

VDC

Maximum input voltage

VDC

Output over voltage

lockout

• Mode: NO

• Static

• Dynamic

Example:

Output over current

protection

• Mode: Hiccup

13POE_4803-10-B

• Protection 48Vin

3.5

13POE = Power Over Ethernet series; 48 = 48Vin; 03 = 3.3Vout;

10 = Watt; B = Pinning

Over temperature

protection

• Mode: NO

• Hysteresis temp.

• Protection

°C

* Ta = 25°C; Io =1A

Note:

1. All speciﬁcations measured at Ta = 25°C, humidity <75%, nominal input voltage

and rated output load unless otherwise speciﬁed.

2. In this datasheet, all the test methods of indications are based on corporate

standards.

3. Only typical models listed, other models may be diﬀerent, please contact our

technical person for more details.

4. Our company oﬀer custom products.

5. Speciﬁcations subject to change without notice.

Page 1 of 2

GAPTEC-Electronic GmbH & Co. KG

sales@gaptec-electronic.com – www.gaptec-electronic.com

13POE_48-10-B – Rev. 2020-1.3

Speciﬁcations subject to change without notice.

中文翻译

下载PDF

与13POE_4812-13-B相关器件

型号	品牌	获取价格	描述	数据表
13POE-48-10-B	GAPTEC	获取价格	10W and 13W - Single Output - Wide Input - Isolated & Regulated
13P-RIZ-K2GG-S3RL	JST	获取价格	在设备连接中，该RIZ连接器是一种混合型连接器，具有信号和电源组合电路，吸收设备间的偏移，
13P-RWZV-K4GG-P4	JST	获取价格	在设备连接中，这种RWZ连接器是一种混合型双排组合式连接器，具有信号和电源组合电路，吸收设
13P-RWZV-K4GG-P4FL	JST	获取价格	在设备连接中，这种RWZ连接器是一种混合型双排组合式连接器，具有信号和电源组合电路，吸收设
13P-SAN	JST	获取价格	这种多电路板插入式连接器能够高效、经济地满足高密度安装在PC板上的需求。
13P-SCN	JST	获取价格	这种多电路板插入式连接器能够高效、经济地满足高密度安装在PC板上的需求。
13P-SGN	JST	获取价格	间距为2.0 mm，封装高度为4.0 mm，深度为2.9 mm的尺寸。这种board-in
13PS-JE	JST	获取价格	高接触压力, 双面接触, 叉型端子箱型塑壳
13PSL-JE	JST	获取价格	高接触压力, 双面接触, 叉型端子箱型塑壳
13P-SZN	JST	获取价格	这种低型面，板插式连接器，封装高度仅为4.25mm，厚度为2.4mm，直接焊接到PC板上。

与13POE_4812-13-B相关文章

LM317T数据手册解读：产品特性、应用、封装与引脚详解
2024-06-14

14
一文带你了解?DB3二极管好坏判断、参数信息、替代推荐
2024-06-14

16
LM358DR数据手册：引脚说明、电气参数及替换型号推荐
2024-06-14

10
OP07CP数据手册解读：引脚信息、电子参数
2024-06-14

17

产品中心

服务支持

精选活动

关于我们

帮助中心

13POE_4812-13-B

13POE_4812-13-B 数据手册

与13POE_4812-13-B相关器件

与13POE_4812-13-B相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

13POE_4812-13-B

13POE_4812-13-B 数据手册

与13POE_4812-13-B相关器件

与13POE_4812-13-B相关文章

您还可以找

您在本页遇到什么问题？