MODEL: 10D
High-density Signal Conditioners 10-RACK
[1] OPTIONS
blank: none
/Q: With options (specify the specification)
CURRENT LOOP SUPPLY
(non-isolated)
Functions & Features
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
• Powering a 4 – 20 mA DC current loop
• Electrically isolating output signal from power input
• Shortcircuit protection
/C02: Polyurethane coating
• Applicable to smart transmitters
/C03: Rubber coating
Typical Applications
GENERAL SPECIFICATIONS
Construction: Rack-mounted; terminal access via screw
terminals at the front and via card-edge connector at the
rear; terminal cover provided
• Various 2-wire transmitters
Connection
Input: M3.5 screw terminals (torque 0.8 N·m)
Output: Card-edge connector and M3.5 screw terminals
(torque 0.8 N·m)
Power input: Supplied from card-edge connector
Screw terminal: Nickel-plated steel
Housing material: Flame-resistant resin (black)
Isolation: Input or output to power
SUPPLY OUTPUT
Output voltage: 24 – 32 V DC with no load
Current rating: ≤ 22 mA DC
• Shortcircuit Protection
MODEL: 10D–A60–R[1]
Current limited: 30 mA max.
Protected time duration: No limit
ORDERING INFORMATION
• Code number: 10D-A60-R[1]
Specify a code from below for [1].
(e.g. 10D-A60-R/Q)
INPUT SPECIFICATIONS
■ DC Current: Input resistor incorporated
• Specify the specification for option code /Q
(e.g. /C01)
OUTPUT SPECIFICATIONS
The output goes below 0 % when the input is open.
INPUT
Current
A: 4 – 20 mA DC (Input resistance 250 Ω)
INSTALLATION
Current consumption: Approx. 50 mA
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Mounting: Standard Rack 10BXx
OUTPUT
Voltage
6: 1 – 5 V DC (Load resistance 250 kΩ min.)
Weight: 200 g (0.44 lb)
OUTPUT 2
0: None
PERFORMANCE in percentage of span
Accuracy: ±0.1 % (accuracy of the receiving resistor)
Temp. coefficient: ±0.003 %/°C (±0.002 %/°F) (temp.
coefficient of the receiving resistor)
POWER INPUT
DC Power
Line voltage effect to supply output: ±3 % over voltage
range
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
http://www.m-system.co.jp/
10D SPECIFICATIONS
ES-0822 Rev.8 Page 1/2