ISOLATED DC/DC CONVERTERS
36 Vdc - 75 Vdc Input 12 Vdc /6 A Output
May 17, 2011
Bel Power Inc., a subsidiary of Bel Fuse Inc.
Mechanical Outline
Pin Connections
Pin
Name
Function
Pin Dia
1
Vin+
0.040’’
Positive input voltage
Input to turn converter
on and off, referenced
to Vin-
2
On/Off
0.040’’
3
4
5
6
7
8
Vin-
Vout-
0.040’’
0.062’’
0.040’’
0.040’’
0.040’’
0.062’’
Negative input voltage
Negative output voltage
Negative remote sense
Output voltage trim
Positive output voltage
Positive output voltage
Sense-
Trim
Sense+
Vout+
Notes: 1. Pin 5 must be connected to Vout-.
2. Leave Pin 6 open for nominal voltage.
3. Pin 7 must be connected to Vout+.
Note: This module is recommended and compatible with Pb-Free Wave Soldering and must be soldered
using a peak solder temperature of no more than 260 ºC for less than 5 seconds.
Note:
1) All Pins: Material - Copper Alloy;
Finish – 3 micro inches minimum Gold over 50 micro inches minimum Nickel plate.
2) Undimensioned components are shown for visual reference only.
3) All dimensions in inches (mm); Tolerances: x.xx +/-0.02 in. (x.x +/-0.5mm) x.xxx +/-0.010 in. (x.xx +/-0.25mm).
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com
8