Datasheet > 030-9542-002

030-9542-002

更新时间： 2024-02-15 01:03:36

品牌	Logo	应用领域
埃梯梯 - ITT		PC 连接器连接器支架
页数	文件大小	规格书
5页	2314K
描述
PCB Terminal

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

030-9542-002 技术参数

是否Rohs认证：	符合	生命周期：	Active
Reach Compliance Code：	compliant	ECCN代码：	EAR99
HTS代码：	8536.90.40.00	Factory Lead Time：	25 weeks
风险等级：	1.68	其他特性：	CONTACT FINISH: GOLD
组装件名称：	CONTACT	连接器支架类型：	CONNECTOR ACCESSORY
触点性别：	FEMALE	触点样式：	RND PIN-SKT
DIN 符合性：	NO	完成厚度：	50
IEC 符合性：	NO	MIL 符合性：	NO
安装方式：	STRAIGHT	端子类型：	CRIMP
Base Number Matches：	1

030-9542-002 数据手册

The Centi Line - .075" Contact Spacing

2D/CTA

CTA Assembly Instructions

INSERTION

2. Position the insertion tool tip on the rear of contact as

shown. The insulation must be pulled back from the crimp pot

approximately 1/32" to allow the tool tip to butt against the

contact crimp pot.

1. Place the connector into the slot in the assembly block with

the arrows on the insulator pointing downward. The connector

will bottom against the internal shoulder in the groove in the

assembly block. Start contact insertion by placing the crimped

contact in the cavity by hard.

.475 (12.06)

MAX.

.275 (6.98)

MAX.

Guide Posts

Polarizing Posts

4. The guide post and polarizing posts are inserted in teh same

manner as the contacts. The guide posts are inserted into the

socket insulator, and the polarizing posts are inserted into the

pin insulartor. The corresponding contact in the mating insulator

must be removed for each.

3. With firm steady pressure, push the contact into the cavity

until the resilient internal shoulder snaps into the locking groove

in the contact. To prevent over insertion, the tool tip bottoms

against the rear of the insulator.

EXTRACTION

2. The pin extraction tool tip is tubular, slides over the pin bundle

and butts against the front shoulder of the pin. The socket

extraction tool is a solid rod that fits into the socket contact, the

external shoulder butts against the contact socket shoulder.

1. To extract the contacts, place the conector face up in the

assembly block so that the contact to be extracted is in the end

of the block that has a fully slotted opening.

3. Insert the extraction tool into the cavity and apply firm

pressure until the contact is pushed thru the rear of the

connector.

4. Lift the insulator from the groove and pull the contact out.

Repeat for balance of contacts to be removed.

Dimensions shown in inches (mm)

Speciﬁcations and dimensions subject to change

www.ittcannon.com

D-88

1 2 3 45

下载PDF

与030-9542-002相关器件

型号	品牌	描述	获取价格	数据表
030-9542-004	ITT	PCB Terminal	获取价格
030-9542-011	ITT	PCB Terminal	获取价格
030-9542-012	ITT	PCB Terminal,	获取价格
030-9542-014	ITT	PCB Terminal	获取价格
030-9542-015	ITT	PCB Terminal	获取价格
030-9542-016	ITT	PCB Terminal	获取价格