Multilayer Ceramic Capacitors
Approval Sheet
6. GENERAL ELECTRICAL DATA
Dielectric
NP0
X7R
Y5V
X5R
X6S
X7S
Size
0201, 0402, 0603, 0805, 1206, 1210, 1812
0.01µF to
100µF
100pF to
0.1µF to
100µF
1µF to
100µF
Capacitance range*
0.1pF to 0.1µF
100pF to 47µF
220µF
#1
Cap≤5pF
:
A (±0.05pF), B (±0.1pF),
J (±5%),
K (±10%),
M (±20%)
C (±0.25pF)
M (±20%),
K (±10%),
K (±10%),
M (±20%)
K (±10%),
M (±20%)
5pF<Cap<10pF:
C (±0.25pF), D (±0.5pF)
Cap≥10pF:
F (±1%), G (±2%),
J (±5%), K (±10%)
Capacitance tolerance**
Z (-20/+80%) M (±20%)
Rated voltage (WVDC)
Operating temperature
Capacitance characteristic
Termination
10V, 16V, 25V, 50V,100V
-55 to +125°C
6.3V, 10V, 16V, 25V, 50V, 100V
-25 to +85°C -55 to +85°C -55 to +105°C -55 to +125°C
+30/-80% ±15% ±22% ±22%
±30ppm
±15%
Ni/Sn (lead-free termination)
#1: NP0, 0.1pF product only provide B tolerance; 0603N0R4 provide B&C tolerance; 0603N0R3 only provide C tolerance.
* Measured at the condition of 30~70% related humidity.
NP0: Apply 1.0±0.2Vrms, 1.0MHz±10% for Cap≤1000pF and 1.0±0.2Vrms, 1.0kHz±10% for Cap>1000pF, 25°C at ambient temperature
X7R/X6S/X5R/X7S: Please refer to page 13 “Reliability test conditions and requirements” for detail.
Y5V: Apply 1.0±0.2Vrms, 1.0kHz±10%, at 20°C ambient temperature.
** Preconditioning for Class II MLCC: Perform a heat treatment at 150±10°C for 1 hour and then leave i n ambient condition for 24±2 hours
before measurement.
Page 4 of 22
ASC_General Purpose_001AE_AS
May. 2019