Datasheet
P76CA-292C
The MSO/DPO70000DX and DPO70000SX Series oscilloscopes and the
P7600 Series TriMode probes were designed to deliver the industry's
lowest system noise levels. When used with a P76CA-xxx Coaxial
Adapters, the vertical setting on the oscilloscope can be set as low as
3.48 mV/div with a system noise <1.1 mVrms at 33 GHz bandwidth.
This high sensitivity is critical for being able to make accurate
measurements on low amplitude signals. The P7600 Series TriMode
probes were designed to deliver superior sensitivity and allow the
oscilloscope to directly measure small signals without using a zoom
function. Using a zoom function to look at small signals does not change
the intrinsic noise floor of the instrument which can make measurements on
small signals problematic.
Connectivity
The P7600 Series probes utilize an interchangeable active tip design built
around a custom tip interface using high frequency SMPM connectors. The
P7600 Series probes feature an Automatic Adapter ID function that
recognizes the attached adapter and automatically applies the correct DSP
filters that eliminate imperfections in the frequency response all the way to
the probe tip. This feature eliminates the risk of manually selecting the
wrong tip type and is more efficient for the user.
Coaxial adapters
33 GHz Bandwidth Coaxial Adapter with 2.92 mm (Male) connectors and 6"
of high performance cable. This adapter is calibrated at the input
connectors and is ideal for directly connecting to devices with 2.92 mm or
SMA output connectors.
Coaxial adapters enable the probe to act like a differential input channel for
the oscilloscope which effectively doubles the number of differential signals
a single oscilloscope can measure simultaneously.
P76CA-SMP
P76CA-292
33 GHz Bandwidth Coaxial Adapter with 2.92 mm (Female) connectors.
This adapter is calibrated at the input connectors and is ideal for use with
off the shelf or custom cables. Low skew cable pairs should be used to
preserve full bandwidth performance.
2 www.tek.com