RCL e3
Vishay Draloric
www.vishay.com
Long Side Termination Thick Film Chip Resistors
FEATURES
• Enhanced power rating
• Long side terminations
• Enhanced thermal cycling performance
• Pure tin solder contacts on Ni barrier layer,
provides compatibility with lead (Pb)-free and lead
containing soldering processes
• AEC-Q200 qualified
LINKS TO ADDITIONAL RESOURCES
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
3
D
3D Models
APPLICATIONS
• Automotive
• Industrial
RCL e3 resistors series are the perfect choice for most fields
of power measurement electronics where reliability,
stability, power dissipation, and robust design is of major
concern.
• Commercial
Typical applications include power electronics in automotive
and industrial appliances.
TECHNICAL SPECIFICATIONS
DESCRIPTION
RCL0406 e3
RCL0612 e3
0612
RCL1020 e3
1020
RCL1218 e3
1218
RCL1225 e3
1225
Imperial size
0406
Metric size code
RR1016M
RR1632M
RR2550M
RR3246M
RR3263M
1 Ω to 1 MΩ; 1 Ω to 39.2 kΩ;
1 Ω to 1 MΩ; 1 Ω to 2.2 MΩ; 1 Ω to 1 MΩ;
Resistance range
40.2 kΩ to 1 MΩ
5 %; 1 %
200 ppm/K; 100 ppm/K
jumper (0 Ω)
jumper (0 Ω)
jumper (0 Ω)
jumper (0 Ω)
jumper (0 Ω)
Resistance tolerance
Temperature coefficient
(1)
Rated dissipation, P70
0.25 W
50 V
1.0 W (2)
200 V
1.0 W (2)
1.0 W
200 V
1.0 W
200 V
2.0 W (2)
200 V
Operating voltage, Umax. ACRMS/DC
Permissible film temperature, ϑF max.
Operating temperature range
75 V
(1)
155 °C
-55 °C to +155 °C
Max. resistance change at P70
for resistance range, |ΔR/R| after:
1000 h
8000 h
Permissible voltage against ambient
≤ 1.0 %
≤ 2.0 %
(insulation):
1 min, Uins
100 V
100 V
100 V
300 V
300 V
300 V
Failure rate: FITobserved
≤ 0.1 x 10-9/h
Notes
(1)
Please refer to APPLICATION INFORMATION below
Specified power rating requires dedicated mounting conditions to achieve the required thermal resistance
(2)
APPLICATION INFORMATION
When the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal
resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted
film temperature is not exceeded.
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift
increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a
functional lifetime.
Revision: 22-Jun-2021
Document Number: 20046
1
For technical questions, contact: thickfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000