Ver: 12
Page: 2 / 16
POE-D04-00-E-12
50V,100V,500V,1KV,2KV Hi-K CERAMIC DISC CAPACITOR FOR DOWN SIZE PRODUCT
Record of change
Date
2008.6.3
2008.8.22
Version
Description
page
1. D15-00-E-09 (before) → POE-D04-00-E-01 (1st edition)
1. Revised diameter
1
2
5-7
16-19
8
2. Complete lead code
3. Add last SAP code “ H” for halogen and Pb free , epoxy resin..
1.Complete lead code of SAP P/N
2. Page layout adjustment.
2008.12.12
3
3-7
3. Added marking when the coating resin is Halogen and Pb free Epoxy.
2009.8.5
4
5
1. Change PSA & POE logo to Walsin & POE logo.
2011/8/24
5-6
7
1. Delete the definition about“Old Part No.”
2. Review the diameter dimension code of “Z5U 1KV 332/362” from 060 to be 070.
3. Delete the Part No. of “Z5U 50V/100V 223”.
7
2011/11/25
2012/11/06
6
7
1. Review the item Y5P/Z5U/Z5V
2. Add the Y5U temperature characteristic
1. Revise the temp.(TCC): Y5P(-25℃ to 85℃/ to 125℃) & Cap. Change(±10% / ±35%)
2. Review the OP temp. for Y5P: Y5P : -25℃ ~ +105℃(INCLUDING CAPACITOR’S
SELF-HEATING MAX.+20℃)
7-8
4-15
4
12-13
2013/5/6
8
1. Review the Lead diameter φ from 0.60 +/-0.06mm to 0.55+/-0.05mm
2. Review the “DΦ≤6.0mm shall be omitted.” to “ DΦ≤060 shall be omitted.”
3. Review the Solderability temperature from 255(+5/-0)℃ to 245±5℃.,Solderability
6,9
8
12
10
11
13
time from 2 ±0.5s to 5±0.5s,
2013/10/18 9
2015/8/4 10
Review the packing specification
1. Review the temperature range:Y5P(-25℃to+105℃)Change(-25℃to+125℃)
2. review the high temperature loading:FOR 1000(+48/-0) HOURS AT 85 ± 2℃
(FOR Y5U, Z5U, Z5V) / AT 105 ± 3℃(ONLY FOR Y5P) AND THEN DRIED FOR
12~24 HOURS AND MEASURED.Change FOR 1000(+48/-0) HOURS AT 85 ± 2℃
(FOR Y5U, Z5U, Z5V) / AT 125 ± 3℃(ONLY FOR Y5P) AND THEN DRIED FOR
12~24 HOURS AND MEASURED.
2015/11/5 11
2019/7/26 12
5-6
7-8
12-13
14
1. Review the Available lead code of Lead Configuration.
2. Modify the contents of the use of epoxy resin for 1KV products
3. Review the Specification and test method
4. Review 8. Cautions & notices
5. Review 9. Drawing of internal structure and material list
16
9
1. Review the Hole-down tape width (W0) from 11.0mm min. to 8.0mm min.