Product specification
5
12
SERIES
102 to 358
YC/TC
Chip Resistor Surface Mount
TC164
0
1-Digit marking
Fig. 9 Jumper=0Ω
E-24 series: 3 digits, 5%
First two digits for significant figure and 3rd digit for number of zeros
2
Fig. 9-1 Value=240KΩ
For further marking information, please refer to data sheet “Chip resistors marking”.
CONSTRUCTION
The resistor is constructed on top
OUTLINES
of a high-grade ceramic body.
Internal metal electrodes are added
on each end to make the contacts to
the thick film resistive element. The
composition of the resistive element
is a noble metal imbedded into a
glass and covered by a second glass
to prevent environment influences.
The resistor is laser trimmed to the
rated resistance value. The resistor
Fig. 10 Chip resistor outlines
is covered with a protective epoxy
coat, finally the two external
terminations (matte tin on Ni-
barrier) are added as shown in Fig.9.
www.yageo.com
Feb. 21, 2019 V.9