5秒后页面跳转
YB-15006863 PDF预览

YB-15006863

更新时间: 2024-04-09 18:55:51
品牌 Logo 应用领域
风华高科 - FH 传感器
页数 文件大小 规格书
2页 1604K
描述
油位传感器用厚膜电阻板

YB-15006863 数据手册

 浏览型号YB-15006863的Datasheet PDF文件第1页 
CHIP RESISTOR  
测试方法  
Test Method  
试验项目  
Test Item  
规定值  
Standard  
使用材料为铍青铜的滑动触点在导体层的滑动区内接触导体,触点与导体层滑动区  
的接触压力为0.25 N±0.05 N,来回磨擦,每一个来回为一次,试验要求不少于  
200个周期(空气中)或500万个周期(浸入汽油或柴油中)。  
Materials used for the bronze sliding contact area in sliding contact with  
the conductor layer of the conductor, the conductor layer sliding contact  
试验后产品接触导线不断  
线,试验后阻值符合要求。  
After test contact wire  
line, after the test value  
conforms to the  
requirement  
导体耐磨性  
Wear life  
with the contact area pressure 0.25 N±0.05 N, rub back and forth, back  
and forth to each one, the test requires less than 200 million cycles  
in  
the airor 500 million cycle ( dip in gasoline or diesel oil).  
使用溶剂85%柴油(或92#汽油)+15%醇。  
Solvent: 85% diesel or 92 # gasoline) + 15% ethyl alcohol  
溶剂温度 (23 5)  
Solvent temperature:(23  
浸泡时间 (10 1)h  
Soaking time:(10  
耐有机溶剂  
腐蚀性  
Corrosion  
±
|ΔR/R|1%  
±
5)  
resistance to  
organic solvents  
±
±
1)h  
将焊盘完全浸入270℃±5℃的锡槽,保持(5±1)s。恢复时间(24±4)h。  
The pad completely immersed in 270℃± of the tin bath, to  
maintain (5 1)s. Recovery time(24 4)h.  
耐焊接热  
Resistance to  
Soldering Heat  
|ΔR/R|1%  
5
±
±
IEC 60115-1 4.8  
/-55 /+25/+125/+25℃  
在规定值内  
within specified T.C.R +25  
电阻温度系数  
T.C.R  
IEC 60115-1 4.19  
-40℃(30分钟)~常温(5分钟)~85℃(30分钟)5个循环;  
-40 (30min) normal temperature(5min) 85(30min)5cycles;  
温度快速变化  
Rapid Change of  
Temperature  
|ΔR/R|1%  
|ΔR/R|1%  
|ΔR/R|1%  
IEC 60115-1 4.13  
2.5倍额定电压或最大过负荷电压()持续5秒。  
Apply 2.5 times rated voltage or Max overload voltage, whichever is  
lower, for 5 s.  
短时间过负载  
Short Time  
Overload  
IEC 60115-1 4.25.1  
70℃±2℃,1000小时 额定电压通1.5小时,断0.5小时,持续1000小时。  
70℃±2, 1000h Rated voltage 1.5h on/ 0.5h OFF 1000h.  
70℃耐久性  
Endurance at70℃  
稳态湿热  
Damp Heat  
Steady State  
IEC 60115-1 4.24  
40±293%±3%RH1000h.  
|ΔR/R|1%  
|ΔR/R|1%  
将产品放置(-55±1)℃的低温试验箱存储,持续时间1000 h。  
Place the product in the low temperature storage chamber which the  
temperature is (-55±1), duration: 1000 h.  
低温贮存  
Low Temperature  
Storage  
高温贮存  
将电阻板放置于(125±1)℃的高温试验箱存储,持续1000 h。  
Resistance to  
|ΔR/R|1%  
Place the resistance plate on the(125  
chamber, continuous 1000 h.  
±1)high temperature storage  
Dry Heat  
上述试验电阻值均按总阻值进行测量判断。  
The above test resistance values are measured by total resistance values.  
2

与YB-15006863相关器件

型号 品牌 描述 获取价格 数据表
YB-15006863-01 FH 油位传感器用厚膜电阻板

获取价格

YB1506 YOBON Step-up DC-DC Converter , White LED Driver

获取价格

YB1508 YOBON Step-up DC-DC Converter , White LED Driver

获取价格

YB1508P YOBON Step-up DC-DC Converter , White LED Driver

获取价格

YB1509 YOBON High-Power White LED Driver

获取价格

YB1510 YOBON Step-up DC-DC Converter,White LED Driver

获取价格